706166
6
Zoom out
Zoom in
Previous page
1/9
Next page
6
With an Ethernet cable, connect one of the Anker routers LAN ports to your
computer’s network port, which was previously used to connect your modem.
Login to the routers homepage, go to the Advanced settings page,
and select Network > WAN Port.
In the MAC Clone tab, click the Clone MAC button.
Click Save and then Reboot Now for the changes to take effect.
A.
B.
C.
D.
Open the Control Panel from your Start menu, and select Network and
Sharing Center.
From the left side, select Change adapter settings.
Right click your local connection or wireless network connection (depending on
your choice of wired or wireless setup).
12. What is the WPS PINor Device PIN?
When connecting to your wireless network, some devices will prompt you to enter
a PIN to configure the device or to confirm valid access by the routers owner. We
do not recommend that you enter a PIN or press the WPS Button on the router
unless your device will not connect any other way. Otherwise, other connecting
devices may be cut off. If you are prompted to enter this PIN, do not enter the PIN
and instead select Connect using a security key instead.
13. How do I enable DHCP in my computer settings before connecting to the
router?
In order for the Anker router to assign an IP address to your computer, you will
need to enable the DHCP or Dynamic IP address setting for your current setup
connection (wired or wireless).
For PC Windows 7 users
A.
B.
C.
Select Properties > Internet Protocol Version 4 (TCP/IPv4).
Select“automatically obtain an IP address and automatically obtain DNS
server address”.
D.
E.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Anker N600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Anker N600 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Anker N600

Anker N600 Additional guide - English - 12 pages

Anker N600 Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info