537056

Angelcare AC401 Manual

5
Zoom out
Zoom in
Previous page
1/87
Next page
E
N
STEP 9
ALARMS AND VIBRATION (VIBRATION NOT AVAILABLE IN SOME COUNTRIES)
This menu will appear ONLY if the vibration option is available on your unit. It allows you to
choose between the following notification options :
- Alarm only
- Vibration only
- Alarm and vibration
NOTE : The vibration mode will not work when the batteries are low or if the parents unit
is on the charger
.
• Press MENU and choose the desired option. The wave icon is for the vibrationmode and
the bell icon is for the alarm mode.
• Select the desired option, using the arrows. Press SELECT.
• Press MENU to view the next option, or EXIT if you wish to stop programming now.
STEP 10
ROOM TEMPERATURE CONTROL
Your Angelcare© monitor can also monitor your baby’s room temperature and let you know
when the temperature is to high or too low. A tripple BEEP will be heard if the temperature
reaches levels out of the chosen range.
• Press MENU, the snow flake and sun icons and the word OFF will appear on the screen.
• Turn it ON or OFF using the arrows.
• Press SELECT.
• If you select to have the room temperature control ON, Press MENU.
The SNOW FLAKE icon will appear, with the temperature. Select the desired lowest
temperature with the arrows and press SELECT.
• Press MENU. The SUN icon will appear, with the temperature. Select the desired highest
temperature with the arrows and press SELECT.
• Press EXIT as this was the last available programmable function.
5
Low battery indicator
• The monitor will revert to battery mode during a power failure only if batteries are inserted
in both units.
• It is also possible to use the Angelcare© monitor in places where electricity is not a
vailable.
• When the nursery unit’s low battery RED light is flashing, its batteries need to be replaced.
On the screen of the parents unit, the battery icon flashes and the nursery unit icon appears.
A short BEEP will also be heard every 15 seconds for about 30 minutes, until the unit shuts
itself off.
• Parents unit should be recharged when icon is clear (will not flash) and a beep sound is
heard. A short BEEP sound will be heard every 15 seconds until the unit shuts itself down.
Note: Do not use Alkaline batteries in the parents unit.
IMPORTANT : If the “Out of range” function is ON, when the nursery unit shuts itself off, the
“Out of range” signal will be heard and displayed on the parents unit.
Low battery
indicator
Red light
STEP 11
BATTERY MODE AND WARNINGS
STEP 12
ADDITIONAL FUNCTIONS
• CHANNEL SELECTION : If the transmission is not clear, or if you hear parasite sounds,
you should change the channel. Press and hold the SELECT
button to change the channel (with the arrows). Then press the
SELECT button again to confirm.
• TEMPORARY MUTE : If you want to mute the sound for 2 minutes, press the center
EXIT button. To reactivate the sound before the 2 minutes have
elapsed, press EXIT again. You can also turn the alarm off by
pressing the same button (this does not apply to the low
battery alarm).
•CONNECTING THE PARENTS UNIT TO THE NURSERY UNIT:
If you lose the connection between the 2 units, press and hold
the MENU button on the parents unit, the "out of range"
indicator will flash. Press and hold the top button of the nursery
unit to re-connect to the nursery unit. The Tic light flashes.
• PAGING: If you want to locate the parents unit, press the top button of
the nursery unit.
AC401 international.qxd 6/10/08 11:44 AM Page 5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401 in the language / languages: German, Dutch, Danish, French, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC401

Angelcare AC401 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info