537056

Angelcare AC401 Manual

7
Zoom out
Zoom in
Previous page
1/87
Next page
7
E
N
Problem Possible Cause Solution
False alarms.
• Baby was removed from crib and nursery unit was not switched OFF.
• Sensor Pad cord not connected properly to nursery unit.
•
Sensor pad is not in full contact with crib mattress, or crib
mattress is not resting on a completely flat or rigid surface.
• Baby is in a very deep sleep or has moved away from sensor pad,
to the edge of the crib.
• Turn off the nursery unit.
• Verify the connection between the sensor pad and nursery unit.
Unplug and reconnect the cord.
•
Make sure there is no bedding between mattress and sensor
pad. Sensor pad
must
rest on a completely flat and rigid
surface. Place a piece of 6 mm (1/4”) plywood to cover the
full size of the crib base.
• Make sure sensor pad is positioned as described under the
section How to operate your Angelcare® monitor. Sensitivity
may need to be adjusted, consult the section on testing your
Angelcare® monitor.
Parents unit is ON but the digital screen
shows “--” and the nursery unit icon is
flashing
• The nursery unit is not ON. • Turn the nursery unit ON.
No sound is being transmitted.
• Units are too far apart (out of range indicator is off on the parent
Unit).
• Batteries are low or improperly installed.
• AC adapters are not connected properly or electrical outlet is
out of order.
• One of the units is not ON.
• Bring parents unit closer to nursery unit.
• Check/replace batteries or recharge parents unit
• Check connections or change to another electrical outlet.
• Ensure both units are ON.
Nursery unit power ON indicator
(second green light)
does not light up.
• AC adapters are not connected properly or electrical outlet is
out of order.
• Nursery unit is not ON.
• Check connections or change to another electrical outlet.
• Move the left wing up to the ON position.
Static, distortion, interference (interference
from other monitors, wireless phones,
walkie-talkies, etc…).
• Selected channel is not free of interference.
• Parents Unit located near motorized devices, fluorescent lights,
television, etc…
• Select a different channel as shown on STEP 12 of the How to
operate your Angelcare© monitor section.
• Rotate Parents unit or move it away from source of
interference.
Feedback (loud noises emitted from
Parents Unit).
• Units are too close to each other. • Move units farther apart (at least 3 meters/10 feet apart).
• Decrease volume on parents unit.
Very weak reception
• Units are too far apart and the “out of range” indicator is
OFF.
• One or both units are placed near a large metal mass.
• One or both units are not in the upright position.
• Batteries are low.
•The link between the parent and nursery unit is lost.
• Turn “out of range”indicator ON as shown in STEP 7
in the
How to operate your Angelcare® Monitor section.
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby’s reach.
• Replace the batteries or recharge parents unit .
• Connect the parent unit to the nursery unit as shown on
STEP 12 of the How to operate your Angelcare monitor
section.
Alarm will not sound.
• Nursery unit is detecting movement when crib is being touched.
• Nursery unit is detecting movement from outside the crib such
as motorized devices, strong drafts, etc…
• Sensitivity is set too high.
• Avoid contact with the crib when monitor is ON.
• Place crib near a solid supporting wall to avoid sensor pad from
detecting movement from outside crib.
• You may need to decrease the sensitivity, consult the section
on Testing your Angelcare® monitor and the section How to
operate your Angelcare® monitor.
TROUBLESHOOTING
AC401 international.qxd 6/10/08 11:44 AM Page 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Angelcare AC401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Angelcare AC401 in the language / languages: German, Dutch, Danish, French, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Angelcare AC401

Angelcare AC401 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info