495938

Altec Lansing M812 - Octiv wireless Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
4
Wireless Connectivity
The transmitter base and speaker can communicate over
three wireless radio frequency (RF) channels. The default
setting is AUTO. You may also manually select one of the
three channels.
In AUTO, the transmitter base looks for and transmits
on the most interference-free of the three channels. The
speaker searches the channels until it finds the base.
It is possible that the speaker and base may lose their
synchronized connection from time to time. You may also
experience interference with the connection.
If you experience interference or lose the connection
between speaker and transmitter base, you can force the
M812 to re-synchronize. To do so, press and hold down
the STANDBY key on the transmitter base. After three
seconds, the LED to the left of the STANDBY key will
begin to flash. Continue to hold down the STANDBY key
until the LED stops flashing (about six seconds).
If you continue to experience interference, check to see
if you can eliminate the source by moving other devices
that use the same RF spectrum. For instance, laptop
computers that use 802.11 wireless networking can
conflict with your M812 wireless connection.
If problems persist, you can manually set the radio
frequency (RF) channel to channel 1, 2 or 3. To do so,
follow the instructions in Advanced Operations under the
heading Set RF Channels (page 8).
Listening To Your M812
Remote Control Operation
To control the M812, the remote control must be pointed
toward the front of the speaker. (In a multi-speaker
system, any speaker that is synchronized can control the
system.) The transmitter base does not have an IR sensor.
Commands are transmitted to the base from the speaker.
The M812 remote control uses two AAA-size batteries.
Power and Input Selection
To turn on the M812, press the STANDBY key on the
transmitter base or the POWER key on the side of the
speaker or the remote control. Select iPod, FM or AUX
by pressing the input selector on the speaker or using the
remote control.
iPod
With your iPod docked in the transmitter base, turn on
your iPod.
Press
on the remote to start playing the iPod. (You
can also press
on the iPod itself.)
FM
To change the radio tuning, press
or on the remote
or the TUNE +/– keys on the speaker. Hold the key down
to make the tuner scan to the next strong signal. Press
the key repeatedly to manually adjust the tuning.
The M812 can store up to six of your favorite FM stations.
To PRESET a station, tune to the desired frequency, then
press and hold the desired PRESET key on the remote
until PRESET shows on the speaker display.
AUX
To play music from an auxiliary audio device, connect the
device to the transmitter base. Control music play back
using the controls on the auxiliary device.
Volume
There are two levels of volume control: local and master.
The range for local and master volume is 0 to 80.
Local volume affects only one speaker at a time. To adjust
local volume, use the + and – keys on the remote control
while pointing the remote control at the speaker that you
want to adjust. You can also adjust local volume using the
VOLUME keys located on the side panel of the speaker.
Master volume allows you to adjust all speakers in a
multi-speaker system from a single location. Master
volume can be adjusted using the MASTER VOL keys on
the remote control.
If you have a single-speaker system, you may use master
and local volume interchangeably.
Treble and Bass
To control treble or bass levels, press the TREBLE or
BASS keys on the remote control. The display on the
speaker will indicate the levels.
Reset
To reset your M812 settings, press and hold the POWER
key
on the side of the speaker for three seconds. See
the Advanced Operation section for more information on
the reset function.
… 4 …


Need help? Post your question in this forum.

Forumrules
1

Forum

altec-lansing-m812---octiv-wireless

Reset search

  • Hi!

    I would like to repair a display at my Altec Lansing M812 speaker, but I don't know how to open the speaker's box. I only guess that the speaker cover has to be removed. Can you send me some service manual? I don't need a user's manual.

    Best regards!

    Vladimir Submitted on 25-5-2021 at 14:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Altec Lansing M812 - Octiv wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Altec Lansing M812 - Octiv wireless in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info