495938

Altec Lansing M812 - Octiv wireless Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
10
Troubleshooting
Symptom Possible Problem Solution
No power to speaker
or to transmitter base.
The power cord is not connected to
a wall outlet and/or the power cord
is not plugged into the AC inlet on
the back of the M812 speaker. The
power supply for the transmitter base
is not connected to a wall outlet and/
or the DC connection is not made at
the rear of the transmitter base.
Check that the AC power cord is fully seated in
the AC inlet on the rear of the M812 speaker. Also
check that the power adapter for the transmitter
base is plugged in and connected to the DC input
on the rear of the transmitter base.
The surge protector (if used) is not
powered on.
If the AC cord or transmitter base power supply
is plugged into a surge protector, make sure the
surge protector is switched on.
The wall outlet is not functioning. Plug another device into the same wall outlet to
confirm the outlet is working.
The power is not turned on. Turn on the speaker by pushing the power key
located on right side of the unit or by using the
supplied remote control. The display on the front
of the speaker will illuminate. Turn the transmitter
base on by pressing the POWER key on the front
of the transmitter base. The LED will illuminate.
No sound is coming
from the speaker.
The volume is set too low.
Wrong input is selected.
System is muted.
The +/– keys on the side of the speaker control
volume. Press and hold the + key to increase the
volume. The volume can also be raised using the
supplied remote control.
Check the volume level on the AUX source device
and set at mid-level.
The iPod is not correctly seated into
the transmitter base.
Turn off the iPod, remove it from the transmitter
base, reseat it, and turn it on again.
If using an AUX source, the audio
source is not properly connected to
the M812 or there is a problem with
the alternate audio source.
•Connectanalternateaudiosource–suchasa
CD player, MP3 player, or DVD player – to your
M812 by plugging one end of a 3.5 mm stereo
cable to the line out of your portable device (if it
has one), or to the audio source’s audio out or
headphone jack. Connect the other end to the
input marked “AUX” on the back of the M812’s
transmitter base.
•Setthevolumeontheaudiosourceatmid-level.
•SetthevolumeontheM812atminimumleveland
adjust upward to a comfortable listening level.
Channels are not synchronized. See Set RF Channels in Advanced Operations
(page 8) to re-synchronize channels.
There is a crackling
sound coming from
the speaker.
The iPod is not correctly seated into
the dock.
Turn off the iPod, remove it from the docking
station, reseat it, and turn it on again.
If using an alternate audio source,
the audio source is not properly
connected to the M812 or there is
a problem with the alternate audio
source.
•Connectanalternateaudiosource–suchasa
CD player, MP3 player, or DVD player – to your
M812 by plugging one end of a 3.5 mm stereo
cable to the line out of your portable device (if it
has one), or to the audio source’s audio out or
headphone jack. Connect the other end to the
input marked “AUX” on the back of the M812’s
dock.
•Setthevolumeontheaudiosourceatmid-level.
•SetthevolumeontheM812atminimumlevel
and adjust upward to a comfortable listening
level.
… 10


Need help? Post your question in this forum.

Forumrules
1

Forum

altec-lansing-m812---octiv-wireless

Reset search

  • Hi!

    I would like to repair a display at my Altec Lansing M812 speaker, but I don't know how to open the speaker's box. I only guess that the speaker cover has to be removed. Can you send me some service manual? I don't need a user's manual.

    Best regards!

    Vladimir Submitted on 25-5-2021 at 14:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Altec Lansing M812 - Octiv wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Altec Lansing M812 - Octiv wireless in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info