Manual Alecto DBX-62 (page 53 of 56) (English, German, Dutch, French)

707243

Zoom out

Zoom in

1/56

6.3 USING MULTIPLE BABY UNITS:

• To make the use of multiple baby units easier, you can assign real

names to the baby units instead of ‘baby-1’, ‘baby-2’, etc. For this, see

paragraph 5.4.

• When all babies are sleeping and the baby units

are all set to sleep mode, the parent unit will first

show the status of baby unit 1 (temperature, battery

indication, night light or lullabies are switched in,

etc.), after 15 seconds the status of baby unit 2, then

unit 3 and finally unit 4. This cycle is repeated for as

long as all babies are sleeping (or quiet).

- Unregistered baby units will be skipped.

- When a baby unit is registered, but not in communication with the

parent unit (out of range, empty battery, switched off), the parent unit

will emit a warning signal. Only after the cause for this out-of-range

notification is cleared, will the parent unit switch over to the next baby

unit.

• As soon as one of the babies starts crying, the parent unit will instantly

indicate the sound and status of the baby unit where the crying is

coming from. Don’t forget that baby unit 1 always has the priority; this

means that when all babies are crying, the parent unit will indicate the

status of baby unit 1. The sequence is: baby-1, baby-2, baby-3, baby-4.

- When several babies are crying, the status of

the first crying baby will be shown (see above

sequence) in the display, but the display will

indicate that another baby is crying.

You can now briey press the button to switch priority and check the

status and sounds of Angel (in the situation mentioned above).

• For each baby unit, you can turn the night light on or off, turn the

lullabies on or off and activate the feeding timer (feeding intervals are

the same for all baby units). For turning these functions on or off and

talking back to the baby unit, the parent unit must be in communication

with the concerned baby unit (the name of this baby unit must be shown

in the display).

6.4 DEREGISTERING:

• Defective baby units or units no longer in use must be erased from

the parent unit’s memory to prevent the parent unit from constantly

indicating an out-of-range error for that baby unit.

You can do this by re-registering the baby units that are still in use. Only

the baby unit you’re no longer using should not be re-registered.

It is not possible to deregister a specific baby unit at the parent unit.

Brian is crying, his status is indicated and you’ll

hear the sound

Angel is also crying

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-62 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DBX-62 Manual

Product: