Manual Alecto DBX-62 (page 55 of 56) (English, German, Dutch, French)

707243

Zoom out

Zoom in

1/56

7.6 ENVIRONMENT:

The packaging of this baby video monitor can be discarded as waste

paper. At the end of the product’s life span, it must not be disposed of

as normal domestic waste. You must bring it to a collection point for the

recycling of electric and electronic equipment.

You must bring exhausted or defective batteries to your local

depot for small chemical waste or to dedicated battery collection

points. Never discard batteries as normal domestic waste.

8 DECLARATION OF CONFORMITY

The Alecto DBX-62/63 meets all essential

requirements and provisions as described in the

European Directive 1999/5/EC. The declaration of

conformity is available on the website

WWW.ALECTO.NL

9 TECHNICAL SPECIFICATIONS

Frequency: 863 - 870 MHz

No. of channels: 53 (set automatically)

Baby unit power: power adapter: 6VDC 500mA (incl.)

S04-003-0060-00500

Parent unit power: power adapter: 5VDC 600mA (incl.)

S04-003-0050-00600

battery pack: LiPo, 3.7V 720mAh rechargeable

(incl.)

Transmission power:

25 mW max.

Recommended ambient temperature: -10°C to +50°C

Storage temperature: -20°C to +60°C

10 PROBLEM-SOLVING

PROBLEM:

Warning tones from the

parent-unit:

Baby unit won’t transmit

Baby unit is transmitting

almost continuously

No sound from the par-

ent-unit:

Beep tone from the par-

ent-unit:

POSSIBLE CAUSE AND SOLLUTION:

Check the display of the parent unit, it shows

the cause of the alarm.

In case of ‘OUT OF RANGE’:

The communication between parent-unit and

baby-unit is interrupted. This interruption can

be caused by external interference, wait for a

while to see if the connection restores itself.

If this happens often, the parent-unit and ba-

by-unit may be at their maximum range, try to

reduce the distance between the two devices.

Possible additional checks:

• check whether the baby-unit is switched on

• check the power to the baby-unit

• check the distance between parent-unit

and baby-unit, reduce if required

The bay unit is not turned on, also check the

power supply (adaptor or batteries)

The microphone sensitivity is set too low,

increase it (see paragraph 5.1)

The microphone sensitivity is set too high,

making the baby unit transmitting almost con-

tinuously, decrease it (see paragraph 5.1)

The volume is turned off, turn the volume on.

The volume is set too high, creating feedback.

• decrease the volume at the parent-unit

• increase the distance between parent-unit

and baby-unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-62 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DBX-62 Manual

Product: