Manual Alecto DBX-62 (page 52 of 56) (English, German, Dutch, French)

707243

Zoom out

Zoom in

1/56

5.6 ALARM TONE:

You can set the unit to emit a clear alarm tone when temperature limits are

exceeded, when the battery is low or when the baby unit is out of range. You

can turn this function on or off as follows:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option ALARM

TONE

4. briey press the M button

5. use the and buttons to turn this function on (ON)

or off (OFF)

6. briey press the button to conrm you selection and to leave the

• will appear in the display when the alarm tone is switched off

• this setting only turns the alarm tone on or off; the alarm itself is not

changed

• when the alarm tone sounds, you can turn it off by briefly pressing the

button

• this does not turn off the feeding time alarm

5.7 VIBRATION FUNCTION:

If you’re carrying the parent unit with you in a noisy room (e.g. while vacuum

cleaning) or you don’t want sounds from the parent unit bothering other

people and you have set the volume to 0, you can switch on the vibration

function:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

VIBRATION FUNCTION

4. briey press the M button

5. use the and buttons to turn this function on (ON)

or off (OFF)

6. briey press the button to conrm you selection and to leave the

• will appear in the display when the vibration function is switched on

6 EXPANSION

The DBX-62 is capable of registering up to 4 baby units. This way you

can monitor 4 babies and because you can assign an individual name to

each unit, you can directly determine which child is crying. Additionally,

for each baby unit you can set the talk-back function, feeding timer, room

temperature, lullabies and night light.

6.1 CODING SWITCH:

In the battery compartment you’ll find a coding switch with 4

positions corresponding with baby units 1, 2, 3 and 4. Make

sure to set an individual code for each baby unit.

6.2 REGISTERING:

Upon expanding, you must register (re-register) ALL baby units,

also the baby units that were already registered.

Preparation:

Both the parent unit and baby unit must be switched off (parent unit: briefly

press and hold the button until the display is completely blank, baby unit:

slide the power switch to the OFF position), but the power supply (adaptor

or batteries) must be connected).

1. press and hold the TALK button on the rear of the parent unit

2. now press and hold the button for approximately 3 seconds until the

parent unit turns on and P/PAIRING appears in the display with the P

ashing. Now release both buttons

3. press and hold the + button on the baby unit

4. now slide the power switch to the ON position, the red light will turn

on, and release the + button

5. briey press the button, the display of the parent unit will show

‘PAIRING BABY X (*) OK and you’ll hear 2 beep tones from the baby

unit you just registered

6. repeat instructions 3, 4 and 5 for the other baby units

7. nally, turn the parent unit and all baby units off and back on

8. the registration is now complete

*: X = 1-4, corresponding to the position of the coding switch

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-62 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DBX-62 Manual

Product: