702258
5
Zoom out
Zoom in
Previous page
1/5
Next page
5
Technical data AD 700
Supply voltage 9-15V DC
- Voltage monitoring Alarm at <7 V+/- 0,5V
Current consumption at 12V
- Quiescent 16 mA
- Alarm state 14 mA
Alarm relay Normally Closed 500 mA/max 100V DC/R<40 ohm
Tamper contact rating 50 mA/max 50V DC
Coverage
- Max range 9 m radius/165°
- Range setting Zone 3 = 1-2 m
Zone 2 = 2-4 m
Zone 1 = 4-9 m
- Size of glass to be protected min 30x30 cm, max 6x6 m
- Max thickness of glass 6,5 mm
- Approved glass Standard window glass (float glass)
Volume of protected room min 20 m
3
, max 250 m
3
Operating temperature -10° to +55° C
Humidity (DIN 40040) <90% r.h. (class F)
Housing protection category IP31
Approvals
VdS Klasse B G104512
Techom Pending
INCERT Pending
National approval conditions relating to the use
of the detector must be followed!
Alarmtech reserves the right to change specifications without prior notice.
© 2004 Alarmtech
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alarmtech AD 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alarmtech AD 700 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info