702258

Alarmtech AD 700 Manual

1
Zoom out
Zoom in
Previous page
1/5
Next page
Acoustic Glass Break Detector AD 700
Installation Manual
Rev. 040915
Features
•
Wide supply voltage from 9–15V DC 16 mA
•
Day/Night control of LED with memory function
•
First up alarm indication
•
Remote control of TEST function
•
Acoustical test in the field (DRC)
•
Form A relay, normally closed
•
Selectable range setting, up to 9 m by DIP switches
•
Simple to program by DIP switches
•
Anti-tamper protection
•
Easy to install
•
VdS approved
Description
AD 700 is a modern acoustic glass break detector giving an
alarm when glass is crossed at intruder attempts through
windows, doors and glazed walls.
The detector is based on latest micro controller computer
technology and programmed to take a lot of relevant acoustic
factors into account: the Digital Room Compensation (DRC).
This makes the detector able to differ between a true glass cross
and other irrelevant sounds.
The detector is for indoor use and can be mounted either in the
ceiling or on a wall opposite to the window being monitored. The
coverage area is 165° which means that several windows in a
single room can be protected.
The panes should measure at least 30x30 cm and maximum
600x600 cm with a maximum glass thickness of 6,5 mm.
24-hour loop
The AD 700 can be used in a 24-hour loop and will function well
in most environments. It is recommended to make tests for a
period of 3–4 weeks. However, noisy areas must be avoided like
industrial workshops, gyms and similar areas. Under very rare
conditions, it may be possible for a combination of random
sounds to trigger an alarm.
Select the best place for the detector
The detector must have a clear “line-of-sight” to the protected
glass.
At ceiling mount make sure the microphone points towards the
pane.
Mount the detector within 9 m from the glass but not closer than
1 m.
At wall mount do not set the detector closer than 30 cm from the
ceiling.
Mount the detector minimum 50 cm from the corner.
Avoid mounting the detector close to air vents.
Avoid placing the detector closer than 30 cm to edges, openings
and large objects that can reflect the sound.
Zone 1
4–9 m
Range in metres
Zone 2
2–4 m
Zone 3
1–2 m
Coverage area in the acoustic room Zone 1–3.
min. 0,3 m
min. 1,0 m
max. 9 m
min. 0,5 m
min. 0,3 m
min. 0,5 m
Location for wall or ceiling mount.
1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alarmtech AD 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alarmtech AD 700 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info