679743
1
Zoom out
Zoom in
WAP6906
AC3800 Tri-Band WiFi Repeater
Quick Start Guide
ENGLISH
RESET
PWR
DC IN LAN1 LAN2
1
EN
Locate a power outlet between your wireless router or AP and
the WiFi dead zone where the clients are. Use the included
power adaptor to connect the WAP6906 power port to an
appropriate power outlet.
Turn the WAP6906 on. The top LED blinks blue while the
WAP6906 is turning on. Wait for the top LED to turn steady blue
showing the WAP6906 system is ready. This may take about 2
minutes.
EN
Press the WPS button on your wireless router or AP. Within 2
minutes, press the WAP6906 WPS button once.
The top LED blinks purple showing the WAP6906 is trying to
establish a WPS connection. Wait for the top LED to turn steady
purple indicating WAP6906 connected with your wireless router
or AP.
If the top LED is blinking amber, the WPS process has failed.
RESET
PWR
DC IN LAN1 LAN2
WPS
within
2 minutes
WiFi
WPS
setup
Android Only
Using SSID
Using WPS
OR
Ethernet Connection LED
EN
Once the WAP6906 links to your wireless router or AP, the top
LED indicates the link quality (Green, Amber or Red) for 5
minutes. After 5 minutes, the top LED turns steady blue showing
the WAP6906 is functioning properly.
If the top LED is blinking red, the WAP6906 lost its connection to
your wireless router or AP. It remains blinking red until you
change the location of the WAP6906 or press the WPS button to
restart the WPS process.
EN
Using SSID: Wireless clients can connect to the wireless router
via the WAP6906 using the WAP6906 device label SSID and
Password.
Using WPS: Wireless clients can also connect to your wireless
router or AP via the WAP6906 using WPS. Press the WAP6906
WPS button twice within 3 seconds. The top LED starts blinking
purple. Within 2 minutes press the WPS button on your smart-
phone or laptop. Wait for the top LED to turn steady purple
indicating the WAP6906 successfully connected with your
device. If the top LED is blinking amber, the WPS process has
failed.
Copyright © 2018 Zyxel Communications Corp. All Rights Reserved.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
See the User's Guide at www.zyxel.com for more information,
including customer support and safety warnings.
Support Information
North America
USA
+ 1 800 255 4101
support@zyxel.com
Safety Warnings
BE
IE
CY
NL
SK
BG
EL
LV
AT
FI
CZ
ES
LT
PL
SE
DK
FR
LU
PT
UK
DE
HR
HU
RO
TR
EE
IT
MT
SI
European Union - Disposal and Recycling Information
The symbol below means that according to local regulations your
product and/or its battery shall be disposed of separately from
domestic waste. If this product is end of life, take it to a recycling
station designated by local authorities. At the time of disposal, the
separate collection of your product and/or its battery will help save
natural resources and ensure that the environment is sustainable
development.
Humid, dusty and extreme environment in which place the product and
obstructing the device ventilation slots are prohibited, any kind of conditions
above may harm your device.
There is a remote risk of electric shock from lightning.
(1) Do not use the device outside, and make sure all the connections are
indoors.
(2) Do not install, use, or service this device during a thunderstorm.
Connect only suitable accessories to the device; make sure to connect the
cables to the correct ports.
Do not open the device, opening or removing covers can expose you to
dangerous high voltage points or other risks. Please contact your vendor for
further information.
Place connecting cables carefully so that no one will step on them or stumble
over them and disconnect all cables from this device before servicing or
disassembling.
Please use the provided or designated connection cables/power cables/
adaptors. connect it to the right supply voltage (for example, 110V AC in North
America or 230V AC in Europe). If the power adaptor or cord is damaged, it
might cause electrocution. Remove it from the device and the power source ,
repairing the power adapter or cord is prohibited. Contact your local vendor to
order a new one.
Risk of explosion if battery is replaced by an incorrect type, dispose of used
batteries according to the instruction.
Please refer to the device back label, datasheet or box specifications catalog
information for rated power of device and operating temperature.
The socket-outlet shall be installed near the device, and shall be easily
accessible because it serves as the main disconnecting device.
x2
Blinking - Negotiating WPS connection.
Purple
On (1 min) - WPS process was successful.
Blinking (1 min) - WPS process failed. Try again.
Amber
Top LED
WPS
RESET
PWR
DC IN LAN1 LAN2
WPS
within
2 minutes
Top
LED
On (5 min) - Good to go.
Green
On (5 min) - Good to go.
Move the WAP6909 away from
the wireless router/AP for
larger range.
Amber
On (5 min) - Place the extender closer to
the wireless router.
Red
Blinking - No connection.
Change location. Press WPS
on the wireless router again.
Red
On - After 5 min displaying link quality the LED turns blue to
show the WAP6906 is functioning properly.
Blue
Green On - Ethernet connection ready on LAN port 1 or port 2.
Blinking - Sending and receiving data.
Off - There is no connection on this port.
LAN Port
LED
RESET
PWR
DC IN LAN1 LAN2
WAP6906
N
e
e
d
W
i
F
i
h
e
r
e
Wireless router
or AP
POWER ON
Power Outlet
Power Cable
Device
Ethernet Cable
QSG
Package Contents
Blinking - Turning On.
On - System ready.
Blue
Top LED
1 Hardware Installation1 11 Uplink WiFi Connection2 11 Link Quality3
Downlink WiFi Connection
4
WiFi Network Name (SSID)
ZyxelXXXXX
WiFi Password
XXXXXXXXXX
OK
Wi-Fi
Wifi Network Name
(SSID)
Wifi Password


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL WAP6906 - AC3800 Tri-Band WiFi Repeater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL WAP6906 - AC3800 Tri-Band WiFi Repeater in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL WAP6906 - AC3800 Tri-Band WiFi Repeater

ZyXEL WAP6906 - AC3800 Tri-Band WiFi Repeater User Manual - English - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info