544197
350
Zoom out
Zoom in
Previous page
1/384
Next page
Chapter 20 Troubleshooting
Media Server User’s Guide
350
The NAS Starter Utility discovered my NSA but the status is always unreachable, even though
I can access it.
You may need to add the NAS Starter Utility to your software firewall’s allow list or lower your
software firewall or anti-virus scanner’s security level. Alternatively you may have to configure your
software firewall or other security software to allow UDP port 50127 traffic from the NSA. If there is
a hardware firewall between you and the NSA, configure it to allow UDP port 50127 traffic from the
NSA.
I was able to access the NSA on a previous attempt but I cannot access the NSA anymore.
If you enable jumbo frames on the NSA in a network that does not support them, you will lose
access to the NSA. If this occurs, you will have to restore the factory default configuration. The
reset process does NOT affect the volume settings, nor data stored on the NSA. Press the RESET
button until you hear two beeps. After the second beep, continue pressing the button for five more
seconds, then release it. You will hear three quick beeps after you release the button.
I have at least two NSAs in my network, how do I identify which one I want to configure in
the NAS Starter Utility screens.
If you have several NSAs connected to your computer/network, give each a unique name. You may
have to disconnect all but one and use the NAS Starter Utility to rename it. Then connect another
NSA and rename it and continue to connect and rename the NSAs one-by-one until they are all
connected and each has a unique name.
Alternatively, if you have a DHCP server on your network and you can access it’s list of assigned IP
addresses, you could see which IP address belongs to which NSA. You can check the MAC address
of your NSA by checking the attached sticker in the device housing.
20.4 NSA Login and Access
I forgot the server name of the NSA.
The default server name is ‘nsa’ followed by the number of your model (‘nsa320’ for example).
Use the NAS Starter Utility to discover your NSA. If you have admin privileges, you can directly
change the IP address of the NSA using the NAS Starter Utility.
If the server name has changed and you don’t have the NAS Starter Utility, see Section 1.1.4 on
page 19 to use the RESET button to return to the default setting.
350


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NSA325 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NSA325 v2 in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NSA325 v2

ZyXEL NSA325 v2 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info