544197
178
Zoom out
Zoom in
Previous page
1/384
Next page
Chapter 9 Network
Media Server User’s Guide
178
IPv6 Settings Click this to configure the following IPv6 settings.
Mode -
Select Auto to have the Device use the IPv6 prefix from the connected routers
Router Advertisement (RA) to generate an IPv6 address.
Select Static if you have a fixed IPv6 address assigned by your ISP.
Select Disable to not assign any IPv6 address for the NSA.
Address - Enter the IPv6 address assigned by your ISP.
Subnet prefix length - Enter the address prefix length to specify how many most
significant bits in an IPv6 address compose the network address. The range is 0 to 128
Default Gateway - Enter the IP address of the next-hop gateway. The gateway is a
router or switch on the same segment as your Device's interface(s). The gateway helps
forward packets to their destinations.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. If you have the IP address(es) of the DNS server(s), enter
them.
Dynamic Select the option to have the NSA get a DNS server address automatically.
Static Select this option to choose a static DNS server address. Type the DNS server IP
address(es) into the fields below.
Primary DNS
Server
Type a primary DNS server IP address.
Secondary DNS
Server
Type a secondary DNS server IP address.
HTTP (Web Configurator)
Enable Another Web
Configuration Port
Select this to configure an additional HTTP port for accessing the web configurator.
Specify a number in the Port Number field.
Jumbo Frames Jumbo frames improve network performance. You must have a 1 Gbps (Gigabit
Ethernet) network that supports jumbo frames. Select the largest size of frame that all
of your network devices (including computer Ethernet cards and switches, hubs, or
routers) support.
When enabled, you can choose between 4 KB, 8 KB, and 9 KB frame sizes.
Note: If you enable jumbo frames on the NSA in a network that does not support them,
you will lose access to the NSA. If this occurs, you will have to restore the factory
default configuration. Push the RESET button on the NSA’s rear panel and
release it after you hear a beep.
Network Diagnostic
Tool
Use this section to test the network connection to a particular IP address or domain
name. Select an address or type it into the field. Then click Ping to have the NSA send
a packet to test the network connection.
Successfully pinged host - The NSA is able to “ping” the host, the network
connection is OK.
Unable to ping host - The NSA is able to “ping the selected host.
Apply Click this to save your TCP/IP configurations. After you click Apply, the NSA restarts.
Wait until you see the Login screen or until the NSA fully boots and then use the NAS
Starter Utility to rediscover it.
Reset Click this to restore your previously saved settings.
Table 31 Network > TCP/IP (continued)
LABEL DESCRIPTION
178


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NSA325 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NSA325 v2 in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NSA325 v2

ZyXEL NSA325 v2 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info