544201

ZyXEL NSA320 Manual

25
Zoom out
Zoom in
Previous page
1/576
Next page
Chapter 2 NAS Starter Utility for NSA221, NSA310, NSA320, and NSA325
Media Server User’s Guide
25
4 Check your settings. If they are OK, click Next. Otherwise click Back. If you want to change
anything other than the user accounts, keep clicking Back until you can change the wizard type to
manual.
5 Wait while the NAS Starter Utility configures the NSA.
After the NAS Starter Utility finishes configuring the NSA, you can select Run zPilot to launch the
zPilot to drag and drop files onto the NSA (see Section 2.6 on page 27) after clicking Finish or just
click Finish to return to the main NAS Starter Utility screen (see Section 2.4 on page 23).
2.5.2 Manual Configuration
1 Set up the NSA’s basic network configuration first.
2 If your Internet connection requires you to enter a user name and password to connect to the
Internet, enter them here and click Next. If you do not need to enter a user name and password to
connect to the Internet, click Skip.
3 The NAS Starter Utility checks the Internet connection.
4 Type a new administrator password (and retype it to confirm) and click Next. If you do not want to
change the administrator password, you can leave the fields blank and just click Next.
5 Specify a name to uniquely identify the NSA on your network. Choose the time zone of your
location. This sets the time difference between your time zone and Greenwich Mean Time (GMT).
6 Select how to configure the hard disks.
With only one hard disk installed, just click Next. If you have two hard disks installed choose one
of the following:
• RAID 1: Use this to mirror all data on one disk to the other disk to protect against data loss.
• Individual Disks: Use this if you want maximum storage capacity and/or you have other means
of protecting your data. This creates two JBOD volumes (with one disk in each), a failure of
one disk (volume) should not affect the other volume (disk).
Table 3 NAS Starter Utility > Config
LABEL DESCRIPTION
Get IP
automatically from
DHCP server
Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
server in your network.
Assign IP Manually Select this if you want to assign the NSA a fixed IP address, subnet mask and default
gateway.
Note: Do not configure an IP address that is already in use in your network. This results to
a network IP address conflict and makes the NSA inaccessible.
Use DNS server
from DHCP server
Domain Name System (DNS) is for mapping a domain name to its corresponding IP
address and vice versa. Select this if the NSA is automatically given DNS information
from the ISP or a DHCP server in your network.
Assign DNS server
manually
If you were given specific IP address(es) of the DNS server(s), select this and enter the
primary and secondary DNS in the corresponding fields.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NSA320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NSA320 in the language / languages: English as an attachment in your email.

The manual is 25,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info