Manual ZTE MF-51 (page 2 of 2) (English)

596000

Zoom out

Zoom in

1/2

4. Input the case-sensitive default password “

admin”, and then click Login to

access the WebGUI Conguration page.

Click Logout to return to the login page.

Click Connect/ Disconnect to access or disconnect from the Internet.

Click ZTE Corporation, ZTE Light Tab, Weather, Twitter, Facebook, or YouTube

to access the predefined link, for the detailed information please consult you

service provider.

Notes:

• Do not put anything on the top of your device. Do not lay devices to overlap

each other when using.

• The device takes 1~2 minutes to initialize, and attach to the network.

PIN Code Verication

If the PIN code of your SIM card is enabled, you will need to input the PIN code

when you login at the rst time.

Notes:

The SIM card will be locked if you enter wrong PIN code consecutively for three

times.

If you want to modify the PIN Status, please select Settings > Advanced > PIN

Manage > Modify PIN to do the actions.

Usage of WPS

If your client device supports WPS, you need not to input the password manually

after WPS has been available. Please do the following:

1. Start up your device.

2. Launch the client device connected to your device.

3. Enable the WPS function of your device.

4. Enable the WPS function of the client.

Notes:

For the detailed operations about the client, please refer to the client’s instruction.

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromagnetic interference

sent by your device if inadequately shielded, such as the electronic system

of vehicles. Please consult the manufacturer of your device before using if

necessary.

• Operating of laptop and desktop PCs and your device may interfere with

medical devices like hearing aids and pacemakers. Please always keep

them more than 20 centimeters away from such medical devices when they

are turned on. Turn your device off if necessary. Consult a physician or the

manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places such as

oil warehouses or chemical factories, where there are explosive gases or

explosive products being processed. Turn off your device if required.

• The use of electronic transmitting devices is forbidden in aircrafts, at petrol

stations and in hospitals. Please observe and obey all warning signs and

switch off your device in these conditions.

• Do not touch the inner antenna area if not necessary. Otherwise it will affect

your device’s performance.

• Store your device out of the reach of little children. Your device may cause

injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn, when your

device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using any

unauthorized accessories may affect your device’s performance, and violate

related national regulations about telecom terminals.

• Avoid using your device near or inside metallic structures or establishments

that can emit electromagnetic waves. Otherwise it may influence signal

reception.

• Your device is not waterproof. Please keep it dry and store in a shady and cool

place.

• Do not use your device immediately after a sudden temperature change. In

such case, it will produce dew inside and outside your device, so don’t use it

until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it. Otherwise your

device will be damaged.

• No dismantling by non-professionals and only qualified technicians can

undertake repair work.

• Operating temperature range of -10 °C ~ +60 °C and humidity range of

5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat and re.

• Do not store battery in hot areas or dispose of it in a re to avoid explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from the device and

store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed recycle

place. Do not put it in familial rubbish.

Warning:

If the battery is broken, keep away from it. If it taints your skin, wash your skin with

abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or maintenance

instructions or procedures.

10 11 12 13 14 15 16 17 18

Notes:

There will be a pop-up window to require the password. Please check the label

on the battery compartment of your device to gain the SSID and preset password

information.

5. Wait a moment, the connection between your device and the client will be

established successfully.

Access the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet in the

Always On or Manual mode. The default mode is Always On.

Notes:

You can browse the WebGUI Configuration page and select Settings > 3G

Settings > Network Select to set the WAN connection mode.

Access the WebGUI Conguration Page

1. Make sure the connection between your device and the client is correct.

2. Launch the internet browser and enter http://192.168.0.1 or http://u.home in

the address bar, or double to launch the internet browser.

Notes:

It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0

or later), Safari (4.0 or later), Chrome (10.0 or later).

3. The login page appears as follows.

Network Select

After logging in, select Settings > 3G Settings > Network Select, and you can do

the following operations.

WAN Connection Mode Set the WAN connection mode.

Band Selection Mode Set the Band connection mode.

Settings

After logging in, select Settings, and you can do the following operations.

Select Settings > Quick

Setup

The Quick Settings wizard guides you how to set the

basic parameters for your device in the safest way.

Select Settings > 3G

Settings

Select the network Mode and set the APN related

parameter.

Select Settings > Wi-Fi

Settings

Set the Wi-Fi related parameters.

Select Settings > USSD

This function allows you to inactive with the service

provider.

Select Settings > STK

Show some services which your (U)SIM card

provides

Select Settings >

Advanced

View the current status of your device, change the

Administrator Settings, restore factory defaults,

manage PIN, set the LAN interface conguration, or

Update the device.

Select Settings > Firewall

Set the Mac/IP/Port Filtering, Port Forwarding or the

System Security conguration.

Notes:

Make sure that you can remember the new password if you change the login

password by selecting Settings > Advanced >PIN Manage. Please restore the

device to the factory default settings in case you forget the new password.

iii. End User’s mishandling, misuse, negligence, or improper installation,

disassembly, storage, servicing or operation of the Product.

iv. Modications or repairs not made by ZTE or a ZTE-certied individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or

other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party

products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the

Product.

End User shall have no right to reject or return the Product, or receive a refund for

the Product from ZTE under the above-mentioned situations.

• This warranty is End User’s sole remedy and ZTE’s sole liability for defective

or nonconforming items, and is in lieu of all other warranties, expressed,

implied or statutory, including but not limited to the implied warranties of

merchantability and tness for a particular purpose, unless otherwise required

under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or

consequential damages resulting from or arising out of or in connection with

using of this product, whether or not ZTE had been advised, knew or should have

known of the possibility of such damages, including, but not limited to lost prots,

interruption of business, cost of capital, cost of substitute facilities or product, or

any downtime cost.

How to Get Help

You can get Help by:

• Sending E-mail to mobile@zte.com.cn

• Visiting http://www.zte.com.cn

• Calling Service Hotline: +86–755–26779999

SMS

This function allows you to view, send and receive short messages.

After logging in, select SMS, and you can do the following operations.

Select SMS > New Message Send or save SMS.

Select SMS > Device Operate the SMS in your device.

Select SMS > SIM Card Operate the SMS in your SIM card.

Select SMS > SMS Settings Set the SMS conguration.

PhoneBook

This function allows you to store contacts to your device or SIM card.

After logging in, select PhoneBook, and you can add a new contact by clicking the

Add New tab, and perform operations to the contacts in the Device or SIM Card

tab.

Status

After logging in, select Status, and you can do the following operations.

Select Status >Basic

Status

View the 3G Wireless Information and system info.

Select Status >

Network Status

View the WAN, LAN, and WLAN information.

microSD Card

Use microSD Card

1. Install the microSD card into the device.

2. Connect the device with your PC or laptop using the provided USB cable, after

a while the system will display it as a removable disk.

3. Use it freely.

Disconnect from the Internet

1. In the WebGUI Conguration page, click the icon.

2. Click

Disconnect icon to disconnect the device from the Internet.

Notes: Turning off the device can also terminate the Internet connection.

Standby Mode

• After powering your device on without USB connection, once no user connects

to the device within 10 minutes and no action is performed to the device, or the

WPS button is pressed manually, the device will enter the standby mode with

the screen off. In the standby mode, the Wi-Fi function will be disabled.

• With USB connection, once no user connects to the device within 10 minutes

and no action is performed to the device, or the WPS button is pressed

manually, the Wi-Fi function will be disabled, and then unplug the USB cable,

the device will enter the standby mode.

In the standby mode, press any button or connect your device and PC with the

USB cable to wake up the device, and the screen will be turned on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ZTE MF-51 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ZTE MF-51 Manual

Product: