596000
1
Zoom out
Zoom in
Previous page
1/2
Next page
ZTE MF51
Quick Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: +86-755-26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in
any form or by any means, electronic or mechanical, including photocopying and
microlm, without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make
modications on print errors or update specications without prior notice.
Version No. : R1.0
Edition Time: 2012-01
Manual No: 079584504098
Introduction
ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA
network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to
communicate anytime and anywhere.
Specication
Data Service
HSPA:
DL 14.4 Mbps
UL 5.76 Mbps
WCDMA CS: UL 64 kbps/DL 64kbps
WCDMA PS: UL 384 kbps/DL 384kbps
Interface USB and Wi-Fi
Wi-Fi Standard 802.11b/g/n
Wi-Fi Security WEP/WPA/WPA2
USB Version USB 2.0 HIGH SPEED
USB Interface Type Micro USB
Weight 80 g
Dimensions (W×H×D): 102.5 mm*51 mm*13.5 mm
microSD card Support up to 32 GB microSD card
Battery 1500mAh Li-ion battery
*Standby time 100 hours
*Working time 4 hours
Charge time 3 hours
Operate system
Windows 7, Windows Vista, Windows XP (SP2 or later),
Mac OS (10.5 or later)
Web Browser
IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or
later), Safari (4.0 or later), Chrome (10.0 or later)
Working temperature -10 °C ~ +60°C
Storage temperature -20 °C ~ +70 °C
Charging temperature 0 °C ~ +40 °C
Humidity 5%~ 95%
Notes:
microSD is a trademark of SD Card Association.
The device’s standby and working time are only for your reference, and based on
ideal working environment.
Getting to Know Your Device
The following figure shows the appearance of the device. It is only for your
reference. The actual device may be different.
Interface and Buttons
1. WPS
This button is used to start Wi-Fi Protected Setup authentication
process and enable/disable the Wi-Fi function.
Hold it for about ve seconds to activate the WPS process.
Hold it for about two seconds to enable/disable Wi-Fi function.
2. Charger/
USB port
Charge your device.
Connect the client to your device via USB cable.
3. Power Hold the Power button to switch on/off the device.
4. Indicators Indicates the status of your device.
Notes:
Press WPS and Power buttons simultaneously, and hold on about three
seconds until all LEDs are off, then release the buttons, the device will restart
automatically and restore to the factory default settings.
Indicators
When the device is powered on, the following icons will light, with the corresponding
indications listed in the table below:
Indicators Status Description
Battery
Indication
RED glittering Please charge.
RED bright The voltage of battery is low.
GREEN bright
The voltage of battery is high.
Fully charged when power on or standby mode
with USB cable.
GREEN glittering
Charging when power on or power off or standby
mode.
LED off
Under power off mode full charged with USB
cable or no charging
No charging or fully charged under standby
mode without USB cable
No battery
Wi-Fi
Indication
BLUE glittering Wi-Fi is active.
BLUE bright WPS is active.
LED off Wi-Fi is inactive or standby mode.
Network
Indication
BLUE glittering 2G Modem data transferring.
BLUE bright Register on 2G network.
GREEN glittering 3G Modem data transferring.
GREEN bright Register on 3G network.
RED bright ERROR or NO network service or No SIM
LED off Standby mode.
Hardware Installation
Inserting SIM Card, Memory Card and Battery
1. Use the thumb catch on the device to open the battery cover.
2. Insert SIM Card into the slot.
Warning:
Please power off the device and remove the external power adapter before
removing or inserting the SIM card, if not, the device or SIM card may be damaged.
3. Insert the memory card into the memory card holder.
4. Insert the battery as shown with the contacts located against the gold springs.
5. Line the battery cover up correctly and press gently to close the case.
Switching On/Off Your Device
Press and hold the Power button to switch on/off the device.
Notes:
Please install battery before power on.
Charging Your Device
1. Insert the charger lead carefully with the correct orientation to the charger port.
The plug only ts one way. Do not use excessive force to insert the plug.
2. Connect the charger to a main socket.
3. Disconnect when the battery is fully charged.
Working Mode
Your device supports three working modes. For the client, we only use PC or laptop
as the example in this document.
USB Mode: Connect the device to your PC or laptop via the included USB cable,
then power on your device. And the following picture is one application example:
Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop
via Wi-Fi. And the following picture is one application example:
Mixed Mode: Connect to the device with the above two connection methods.
The following picture is the application example. All of the client devices can surf on
the Internet at the same time.
1 2 4 5 6 73 8 9
Establish a connection between your device and
the client
Via USB Cable
1. Connect your device and the client with the USB cable.
2. Install software.
After the installation, the connection between your device and the client will be
established successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-
Fi status icon will light.
2. If the Wi-Fi status shown is blue bright or LED off, hold the WPS key for about
2 seconds to enable the Wi-Fi function.
3. Use your normal Wi-Fi application on the client to search the available wireless
network.
Notes: You need to check your Wireless Network Connection. Set the client to
obtain an IP address automatically in the Internet protocol (TCP/IP) properties,
and the client will get an IP address like”192.168.0.101”.
4. Select the SSID of your device, and then click Connect.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZTE MF-51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZTE MF-51 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info