533233
1
Zoom out
Zoom in
Previous page
1/3
Next page
Film strip scanner solution
If you purchased a Film strip scanner from Aldi, and you are experiencing some problems with it, here is a
way of making it work.
Please go trough this guide step by step and take you time to read it carefully. In most cases you don’t have
to read the whole document. Just start at point 1!
Best Regards,
The unisupport team
www.unisupport.net
1. Before you start, make sure you installed the correct driver and photo impression software. In most
cases you just need to install the 32-bit driver. If you need the 64-bit driver you most likely know
you are running a 64-bit operating system. If you doubt, then always use the 32-bit driver.
2. Connect the scanner. Wait until the hardware detection is done.
3. Right click(!) on the ‘My computer’ icon on your desktop (or start-menu).
4. In the menu that opens, click on ‘Manage’. A window opens similar to the one here:
5. In the left side of this window, click on ‘Device Manager’.
6. Now, if you see in the right window a ‘USB camera’ with (or without) exclamation mark, as shown
here, then read on. If you don’t see this then go to step number 9.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zolid Film strip scanner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zolid Film strip scanner in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info