623348
5
Zoom out
Zoom in
Previous page
1/35
Next page
ZENNiO AVANCE Y TECNOLOGÍA
5
The programming button (3) is used to set ZAS in the programming mode, by means of a short push
(the programming LED lights red).
Note: If this button is held while plugging the device into de KNX bus, ZAS goes into secure mode.
The LED blinks red.
Besides the Programming button, the button 7 (bottom left in the tactile area) can also be used to
set the controller in the programming mode. (Note: This method can be used the first time ZAS is
connected to KNX bus, before downloading the corresponding application program).
In the factory status of the controller, after connecting it to the KNX bus and before downloading its
application program, the message "NO PROGRAM" will be shown at the upper side of the Display,
and in the middle of it, the status of the programming LED will be shown: "LED OFF" or "LED ON",
as appropriate.
Once the application program download has finished, it is necessary to calibrate ZAS. The touch
calibration is carried out pressing the buttons 1, 2, 7 and 8, in this order (see graphic description in
Figure 1.3). The display will indicate the buttons to press at any time (only if a text chain associated
to this process has been previously configured in the screen "General Labels" in ETS. See section
3.2).
Figure 1.3. Calibration sequence
To obtain a more detailed information about the technical features of ZAS, as well as security and
installation information, please read the controller Datasheet, included in the original package of the
device and also available at: http://www.zennio.com.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio ZAS Room Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio ZAS Room Controller in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio ZAS Room Controller

Zennio ZAS Room Controller User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info