623348
4
Zoom out
Zoom in
Previous page
1/35
Next page
ZENNiO AVANCE Y TECNOLOGÍA
4
1.2. INSTALLATION
ZAS is connected to the KNX installation as any other KNX device, through the KNX
connector placed at the back.
For installing ZAS, first it is necessary to fix the metallic piece into the squared/rounded standard
box where it is going to be installed, with the corresponding screws.
Next, the KNX bus and the inputs terminal must be connected using the corresponding connectors;
both terminals are placed in the rear part of the device.
Once inputs and bus KNX are connected, the device is fitted in the metal platform thanks to the
included magnets.
Finally, it is necessary to check, from both sides, that nothing unless the ZAS outline can be seen
(the metal platform should be completely hidden by ZAS).
This device does not need any additional external power supply since it is powered through the
KNX bus.
Figure 1.2. ZAS Elements scheme
1.- KNX connection
2.- Temperature sensor
3.- Programming button
4.- Programming LED
5.- Inputs (A/D)
6.- Magnet
7.- Tactile area
8.- Display
9.- IR receiver
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio ZAS Room Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio ZAS Room Controller in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio ZAS Room Controller

Zennio ZAS Room Controller User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info