539658
36
Zoom out
Zoom in
Previous page
1/38
Next page
40 VC1200-001_v02
Components of the appliance
A
1
ON/OFF button
2
Handle
3
Handle release button
4
Upright frame
5
Handheld cleaner
6
Electrobrush release button
7
Dust container release button (power ON indicator)
8
Electrobrush
9
Charging station with mounting latch
10
Charging station base
11
Handheld cleaner housing
12
Handheld cleaner release button
13
Handheld cleaner ON/OFF button
14
3-in-1 brush
A
Brush – attachable brush for small suction nozzle
B
Small suction nozzle
C
Crevice tool
15
“CYCLONE” container (installed on the cleaner)
16
HEPA lter (installed on the cleaner)
17
AC adaptor
Assembly – preparing the appliance for
use
1
Unfold the handle.
2
Attach the electrobrush to the upright frame.
3
Fix the charging station to the base.
4
Place the cleaner and electrobrush on the charging
station. To do so, slide the opening on the upright frame into
the latch on the charging station.
5
Mount the handheld unit on the cleaner. To do so, insert
handheld cleaner inlet into air inlet on the cleaner and push
towards the upright frame until it clicks into place.
6
To start clearing, take the cleaner off the charging station
and switch on by turning the ON/OFF button in the “On
position.
The appliance may be switched on/off only by
pressing the On/Off button/switch.
USING THE HANDHELD CLEANER
1
Remove the handheld cleaner from the upright frame by
pressing the release button.
2
The handheld cleaner may be used alone or with
accessories supplied with the unit.
3
Switch on the handheld cleaner by pressing the ON/OFF
button. The power indicator will light.
B
C
After use, turn off the appliance by pressing the ON/OFF
button. To replace the handheld unit on the upright frame,
position the front part of the handheld cleaner down into
the air inlet of the upright cleaner, and push until it clicks
into position.
Accessories
ELECTROBRUSH
8
The electrobrush is used for cleaning short length carpets,
tted carpets, oorings and tiles. The rotating brush
successfully removes old, trampled on and persistent dirt,
e.g. small pieces of thread, fabrics, and paper.
It is especially recommended for households with pets,
where removal of pet hair from rugs and carpets is very
cumbersome.
Do not use the electrobrush for cleaning long
pile carpets. The electrobrush is provided with
a safety device which will automatically turn off
the brush if used on long pile fabric for a longer
period of time. This safety feature protects your
electrobrush against damage. Wait few minutes
before switching on the device again.
In case of contact with a body part (e.g. hand),
the electrobrush will automatically turn off to
avoid injury.
3-IN-1 BRUSH
14
The 3-in 1 brush consists of a crevice tool, small suction
nozzle and a removable brush which may be attached to
the nozzle. These accessories have various applications, as
described below.
Crevice tool is used for cleaning crevices, corners, stairs,
keyboards and other hard-to-reach areas.
Small suction nozzle is used for vacuuming sofas,
couches, beds, etc.
The brush inserted on the small suction nozzle is perfect
for cleaning furniture, shelves, curtains, etc.
All put together, the above components make a 3-in-1
brush with extended cleaning reach.
Charging the battery
D
Before charging, make sure that the appliance is turned off.
1
Connect the charging station to the base.
Place the charging station near AC outlet.
2
Plug the end of the AC adaptor cable to the base of the
charging station.
3
Insert the adaptor into an AC outlet. The indicator light on
adaptor will turn green.
4
Place the vacuum cleaner in the charging station (the
handheld cleaner must be mounted on upright frame).
5
After placing the appliance in the charging station, the
power supply indicator light will change from green to red,
indicating that charging is in progress.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Cito VC1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Cito VC1200 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info