538929

Zelmer 41Z012 Manual

50
Zoom out
Zoom in
Previous page
1/52
Next page
50 GW41-001_v01
ADDITIONAL INFORMATION
Sound signals
1. If there is a malfunction, you will hear a sound signal which will last for
10 seconds.
2. If there is some problem not connected to the cooker, the display panel
will indicate an “E1” error code symbol as long as the cooker is turned
on and no cause for the problem can be established.
3. When the cooker has been plugged into a power source or there is
2 hours left to automatic shutdown, you will hear a one-second sound
signal. When manually changing the function the sound signal lasts
only 0.2 seconds.
4 Signal informing about the end of function setting is a singular signal
lasting 0.2 seconds.
The cooling fan
1. The cooling fan will not turn on, if there is no function going on.
2. The cooling fan will automatically turn on after selecting one of the
functions, apart from the preset mode and the keep warm function.
3. A temperature sensor decides whether to turn the fan or not.
a) When the temperature of the power output coil is ≥55°C, the
safeguard will trigger the fan to turn on.
b) When the temperature of the power output coil is <55°C, the fan will
not turn on.
Displaying malfunctions and errors
1. Automatic error detection in case of using an improper dish.
When using a dish with less than 12 cm in diameter or made out of an
improper material, you will hear a sound signal and the display panel will
indicate an “E1” error code symbol. The heating power indicator will ash
and the function indicators will all be lit permanently. If there is no dish on
the cooker for one minute, the device will automatically turn off.
2. The overheating safeguard of the power output coil (IGBT).
When the temperature of the power output coil is above 110 ±10°C, the
cooker will automatically cut off the power supply. The display panel will
indicate an “E2” error code symbol. The heating power indicator will ash
and the function indicators will all be lit permanently. You will hear a sound
signal.
3. Excessive voltage safeguard.
If the voltage is higher than the one given on the rating plate, the induction
cooker will automatically cut off the power supply. The display panel will
indicate an “E3” error code symbol. The power indicator will ash and
the function indicators will all be lit permanently. No sound signal will be
emitted. When the voltage is back to the standard value, the cooker will
automatically turn itself back on again and return to work.
4. Low voltage safeguard.
If the voltage is lower than the one given on the rating plate, the induction
cooker will automatically cut off the power supply. The display panel will
indicate an “E4” error code symbol. The power indicator will ash and
the function indicators will all be lit permanently. No sound signal will be
emitted. When the voltage is back to the standard value, the cooker will
automatically turn itself back on again and return to work.
5. Malfunction of the main sensor.
If the main temperature sensor is malfunctioned, the cooker will
automatically turn off after one minute. The display panel will indicate an
“E5” error code symbol. The power indicator will ash and the function
indicators will all be lit permanently. No sound signal will be emitted. In
such a case you have to manually unplug the cooker from the power
source. If there is any possibility of short-circuit, the display panel will
indicate an “E6” error code symbol.
6. Anti-overheating and short-circuiting safeguard.
If a sensor indicates that the temperature has reached the value of 340°C
±20°C or there is a short-circuit, the cooker will automatically cut off the
power supply. The display panel will show an “E6” error code symbol.
The power indicator will ash and the function indicators will all be lit
permanently. No sound signal will be emitted. In such a case you have to
manually unplug the cooker from the power source.
7. Utensil too small.
When a utensil which is too small (under 8 cm in diameter) is placed on
the induction cooker, the device will not start. The utensil must be at least
12 cm in diameter for the cooker to be working properly.
CLEANING AND CARE
Before cleaning turn the cooker off and wait for it to cool off. ●
Use mild detergents. Do not use aggressive detergents found in cream ●
cleaners, emulsions etc for washing the casing of the device. They may
remove the information as graphical symbols, safety marks etc.
Remove all ingredients and leftovers using a wet cloth. ●
Do not immerse the cooker in water! ●
Do not clean the induction plate with steam. The burst of steam can ●
damage the appliance.
Make sure the cooker is cool and dry before storing it. ●
ECOLOGY – ENVIRONMENT PROTECTION
Each user can protect the natural environment. It is neither difcult nor
expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into
container for plastic.
When worn out, dispose the appliance to particular
disposal centre, because of the dangerous elements
of this appliance, which can be hazardous for natural
environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in
order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.
… 50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 41Z012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 41Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer 41Z012

Zelmer 41Z012 User Manual - English, Polish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info