Manual Zelmer 41Z012 (page 49 of 52) (English, Polish)

538929

Zoom out

Zoom in

1/52

49GW41-001_v01

LED on the display panel will form a “b” symbol. Only the function

indicator will be on. After 2 hours the Keep warm mode will be

turned off.

6. At any moment the cooker may be turned off by pushing the Power on/

off button.

Fry function

1. Turn on the cooker by pressing the Power on/off button. Using the

MENU key select the Fry function. The Fry function indicator will lit up.

The default temperature is 220°C. The heat power indicators will be

on. To choose some other temperature values press the “+” or “-” keys.

You can choose from 8 different temperature presets: 60°C, 90°C,

120°C, 140°C, 160°C, 180°C, 200°C and 220°C, which correspond to

power of: 800 W, 800 W, 1000 W, 1000 W, 1400 W, 1600 W, 1800 W

and 2000 W. The Fry function may be changed at any time to other

functions by pressing the MENU key.

2. To adjust and select the temperature, press the “+” or “-” keys. When the

temperature reaches the maximum level, the “+” key will be disabled.

Consequently, when the temperature is at its minimum level, the cooker

will not respond to pressing the “-” key.

3. To set time for the process, press the TIMER key (you can select from

00:01 to 23:59 minutes). The time set will be counting down on the

display panel. If the settings were not changed, the default time will be

15 minutes (in such a case the display panel will show temperature and

not time). Furthermore, if you change the time settings, the Power (W)

indicator will not be lit up and the heat power indicators will ash on

a rotation basis from left to right until the process is over.

4. In order to check the temperature level, press the MENU key. The

indicator will lit up and the display panel will show information about the

temperature level. You have now 5 seconds to change the temperature

settings. If no changes were made, the cooker will go back to the

settings and the display panel will show the remaining time of the

function.

5. The function does not support the Keep warm mode. You will be

informed about the end of the process by a ten-times sound signal.

6. At any moment the cooker may be turned off by pushing the Power on/

off button.

Stir Fry function

1. Turn on the cooker by pressing the Power on/off button. Using the

MENU key select the Stir Fry function. The Stir Fry function indicator

will lit up. The default temperature is 2000. The heat power indicators

will be on. To choose some other power values press the “+” or “-” keys.

You can choose from the following range of presets: 100, 300, 600,

800, 1000, 1200, 1400, 1600, 1800, 2000. The Stir Fry function may be

changed at any time to other functions by pressing the MENU key.

2. To set time for the process, press the TIMER key (you can select from

00:01 to 23:59 minutes). The time set will be counting down on the

display panel. If the settings were not changed, the default time will be

15 minutes (in such a case the display panel will show temperature and

not time). Furthermore, if you change the time settings, the Power (W)

indicator will not be lit up and the heat power indicators will ash on

a rotation basis from left to right until the process is over.

3. In order to check the level of power, press the MENU key. Power (W)

indicator will lit up and the display panel will show information about the

power level. You have now 5 seconds to change the power settings.

If no changes were made, the cooker will go back to the settings and

the display panel will show the remaining time of the function.

4. When the power is at its maximum level, the cooker will disable the “+”

key. Consequently, when the power is at its minimum level, the cooking

will not respond to pressing the “-” key. The tolerance level regarding

the factual power is around -100W, +100W.

5. The function does not support the Keep warm mode. You will be

informed about the end of the process by a ten-times sound signal.

6. At any moment the cooker may be turned off by pushing the Power on/

off button.

Energy saving function

In functions heat milk, keep warm, pressure cook, steam, slow cook,

soup, during which the temperature inside the utensil reaches ca. 60°C

to 80°C, the heating system turns off and the Energy saving indicator is lit

on, informing you that the device is working in energy saving mode. When

the temperature of the utensil drops below ca. 60°C to 80°C, the heating

system turns on and the Energy saving indicator is off.

TIMER function

1. The TIMER option is used to manually set time in standard work modes.

To adjust the time for a process push the TIMER key. Four LED on the

display panel will indicate “xx:xx” starting the countdown, however, only

the “:” between the digits will be pulsating. Furthermore, if you change

the time settings, the Power (W) indicator will not be lit up and the heat

power indicators will ash on a rotation basis from left to right until the

process is over. If the settings were not changed, the default time will

be 15 minutes (in such a case the display panel will show temperature

and not time).

2. The longest time to be set is “23:59”, and the time bracket is between

“00:01” and “23:59”.

3. Manual time adjustment:

Each individual push of the “+” or “-” keys increases or decreases ●

the time by 1 minute.

Pressing the “+” or “-” key for more than 2 seconds will increase or ●

decrease the time for 1 or 10 minutes.

The display bracket of minutes ranges from 01 to 59 minutes. If the

minutes on the display are >50 but <10, the unit of change will be

1 minute (e.g. if the time on the display panel is “00 : 51”, it may be

increased by a minute to “00:52”). If the current time in the bracket

of minutes is in the range of 10 to 50, the unit of change will be 10

minutes.

4. Setting the time to “00:00” will cause the cooker to turn off (without any

priori warning signal).

5 You will be informed about the end of the countdown process by a ten-

times sound signal.

PRESET function

1. The Preset function may be used only in the Heat milk, Keep warm,

Pressure cook, Steam, Slow cook and Soup functions. The function

does not allow you to change power, temperature or time (except for

Steam and Slow cook functions, which during the process have the

possibility of time adjustment).

2. Turn on the cooker by pressing the Power on/off button. Push the

PRESET key. The display will indicate “00:01”. To adjust the time setting

for the function in minutes press the “+” or “-” keys within 5 seconds.

After the next push of the PRESET key time will be adjusted in hours.

The longest time to be set is “23:59”.

3. After setting the time for each function, the data will be automatically

saved. The given function indicator will be lit on. The preset time will be

counted down on the display panel. Four LED on the display panel will

indicate “xx:xx” starting the countdown, however, only the “:” between

the digits will be pulsating. After the countdown of a given function is

over, the indicators will go off, the cooling fan will turn off and you will

hear a one-second sound signal.

4. After pushing the PRESET key within 60 seconds you will be able

to select a function. If no function key is pushed within the given

60 seconds, the Heat milk function will be selected, as it is the rst

available automatic function.

Cancelling the time Preset function

1. The Preset function may be cancelled by pressing the Power on/off

button, which will result in turning off the cooker. After turning the device

on again, the settings will be back to the default.

2. By pressing the MENU key and conrming the preset time, the cooker

will automatically go to the next automatic function without cancelling

the preset time.

CHILD LOCK mode

Both in automatic and manual modes to turn the Child Lock mode on press

and hold the CHILD LOCK key for 2 seconds. The mode indicator will

turn on (if you press the CHILD LOCK key before starting an automatic

or a manual mode, the indicator will remain off) and other functions will be

disabled. To unlock the cooker:

Press and hold the CHILD LOCK key for 2 seconds. The mode indicator ●

will go off and other functions will be again available.

Turn off and turn the cooker on again by pressing the Power on/off ●

button.

Both locking and unlocking the cooker will be accompanied by a sound

signal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 41Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer 41Z012

Zelmer 41Z012 User Manual - English, Polish - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 41Z012 Manual

Product: