539768

Zelmer 37Z011 Manual

69
Zoom out
Zoom in
Previous page
1/70
Next page
71GW37-008_v02
9
Press the cooking time adjustment button “+” or “–“ to
change the cooking time setting. The time settings can be
changed even during the automatic cooking mode.
In order to change the cooking mode settings during
●
operation press the start/stop (13) button and then
change the cooking mode using the MENU (14) button.
After selecting the cooking mode press the start/stop
(13) button.
The symbol
●
will ash on the display (10) during the
cooking process.
In order to switch off the appliance press the start/stop
●
(13) and next press the button.
Program 1 and Program 2 have to be individually set and
●
saved. The instruction of setting P1 and P2 is described
below.
10
After the selected cooking time is up you will hear
a double beep and the appliance will automatically switch to
the keep warm mode. The icon will start to ash.
After 20 minutes of keeping the temperature you will hear
ve beeps and the appliance will automatically switch off.
11
After steaming unplug the supplying cord from the mains
supply outlet.
12
Remove the lid using its handle, then remove all the
bowls from the water tank.
CAUTION: Pay special attention while removing the
drip tray (6) as water in the water container (9) and the
liquid on the drip tray may still be very hot, although
other parts of the appliance are already cool.
Program 1 and Program 2
Press and hold the MENU button
●
(14) for about
3 seconds. The icon will begin to ash.
To select P2, press the MENU button
●
(14) again. The
icon will begin to ash.
Set the desired cooking time by pressing the cooking
●
time adjustment button “+” or “–“. You will hear a beep
each time you press the button.
Press the start/stop button
●
(13) o save the set time. The
digits on the display will stop ashing.
NOTE: You can use P1 and P2 to save the most
commonly used cooking times. For example if you
cook meat in the food steamer for 55 minutes, set the
cooking time for P1 or P2 for 55 minutes.
It is possible to adjust the time while using P1 and P2.
Setting the automatic timer
Press the automatic timer button
●
.
Set the time, after which the cooking process is to start by
●
pressing the cooking time adjustment button “+” or “–“.
The time setting will increase in the following intervals
●
0 min, 5 min, 10 min, 15 min, …, …, …, 23.55 min, 0 min
(reverse order after pressing the “–“ button).
Press the start/stop button
●
(13). The available cooking
modes and the icon will be shown on the display.
Choose the cooking mode by pressing the MENU button
●
(14).
If you need to set the cooking time, press the cooking
●
time adjustment button “+” or “–“.
Press the start/stop button
●
(13).
The time after which the cooking process is to start will
●
decrease in one minute intervals and the icon will
show on the display.
The cooking process will start when the timer reaches 0.
●
After the end of the cooking process, you will hear two
●
beeps and the appliance will automatically switch to the
keep warm mode. The icon will begin to ash.
After 20 minutes of keeping the temperature, you will
●
hear two beeps and the appliance will automatically
switch off.
Keeping the temperature
Steam cooked food is healthiest and most aromatic
immediately after preparation. However, if it is necessary
to keep the food warm for a short time, use the keep warm
function by pressing the MENU (14) button and, if
necessary, set the time with the appropriate cooking time
adjustment button “+” or “–“.
Automatic temperature keeping
The appliance automatically switches to the keep warm
●
mode for 20 minutes after the selected cooking time is
over.
You will hear ve beeps after the keep warm mode is
●
over. The appliance will switch off automatically.
NOTE: The icon will ash on the display when
the appliance is operating in the keep warm mode.
Adding water during cooking
In case of dishes that require long cooking:
You will hear a continuous beep and the symbol
●
will
start to ash if the water level drops below the MIN level.
Check the water level.
●
If the water level drops below the MIN level, add water
●
through the water inlet.
The beep sound will stop and the symbol
●
will stop
ashing when the water level reaches above the MIN
level. Press the start/stop button (13) to restart the
appliance.
Automatic switch off
The appliance switches off automatically if it is plugged in
and left unattended.
The food steamer switches off automatically after one minute,
you will hear a double beep in the following situations:
When the programmed operation has ended.
●
If the selected program is not conrmed after the keep
●
warm mode is automatically switched on.
Press to switch the appliance on once again.
… 69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 37Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 37Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info