538890
27
Zoom out
Zoom in
Previous page
1/28
Next page
27
Removing and replacing the filter holder
Always x the lter holder (15):
from the left, by pressing it upwards
(di-
rection a) so that the holder ts in the slot
in the cover of the brew head (7),
turn it all the way to the right (direction b).
To remove the lter holder, follow the proce-
dure in reverse order from the right to the
left, and then remove it from the brew head
by pulling it downwards.
Rinsing the system
The system needs to be rinsed before its rst use or when the appli-
ance has not been in use for a longer period of time.
1. Rinsing the system for the espresso coffee function
Disconnect the espresso machine from the
power supply network.
Fill the water tank with water (see: “Filling
the water tank with water”).
Place an empty lter holder (15) in the brew
head (7) and turn it all the way from the left
to the right.
Place a container (a jug) on the plate (8) un-
der the brew head (7).
Plug the espresso machine into a suitable
mains socket; the appliance will come on.
A sound signal will be heard and a pilot light of the main switch (2) will
start ashing.
When the required temperature is reached, the pilot light of the main switch
will give continuous light.
Press the button for setting espresso coffee brewing for 2 cups
(4) to
activate water ow.
Repeat water ow 3 times.
2. Rinsing the system for the cappuccino function
Press the steam activating button (“cappuccino”) (6). A sound signal will
be heard and the pilot light of the main switch will start ashing.
When the required temperature is reached, the pilot light of the main switch
will give continuous light.
Place a container under the steam wand
(12) and slowly turn the steam
regulator knob (11) into position .
WARNING!
Always use a cup with a handle or a special cup for “cappuccino” for
this activity.
Empty the container after about 1 minute of steaming.
Repeat the steaming process 3 times.
When the activities described above have been completed, the es-
presso machine is ready to use.
Brewing espresso coffee with the use of the automat-
ic brewing function
Disconnect the appliance from the power supply network.
Fill the water tank with water (see: “Filling the water tank with water”).
Plug the espresso machine into a suitable mains socket; the appliance
will turn on. A sound signal will be heard and a pilot light of the main
switch will start ashing.
When the required temperature is reached, the pilot light of the main switch
will give continuous light.
Remove the lter holder from the appliance by turning it all the way
from the right to the left and pulling it downwards.
Using the measuring spoon (17) pour ground coffee into the lter (18)
and tamp it lightly:
1 measure of coffee for 1 cup
2 measures of coffee for 2 cups
Remove excess coffee from the rims of the lter.
Place the lter holder containing coffee in the
brew head and turn it all the way from the left
to the right.
Place a coffee cup or cups under the brew
head, on the plate.
Press the button for automatic espresso coffee
brewing (4) to obtain brew.
The espresso machine was factory set to allow
setting the appliance for two amounts of coffee brewed:
Slot in the cover of
the brew head
1 cup 35 to 65 ml – press the upper button (4).
2 cups, 35 to 65 ml each – press the lower button (4).
NOTICE:
In order to obtain a better aroma of the coffee brewed, cups need to
be pre-warmed by putting them on the plate (10).
The steam wand may also be used for this purpose (12):
Place a cup under the outlet of the steam wand, turn the regulator knob
so that the hot water owing out warms the cup.
To change the set amount, follow the instructions under: “Changing
the set amount of espresso coffee”.
The brewing process stops automatically when the set amount of es-
presso has been brewed.
Remove the lter holder (15) from the brew head (7) by turning it all the
way from the right to the left.
Remove the used coffee. When doing it, hold the lter by pressing the
lter lock with a thumb (13).
Rinse the lter with water.
Preparing espresso coffee with the use of the manual
brewing function
Espresso coffee may be obtained without using the automatic setting of
the amount of coffee. The manual espresso brewing function allows to ob-
tain an additional amount of coffee.
Follow the description under “Brewing es-
presso coffee with the use of the automatic
brewing function”.
Press and hold the button for manual espres-
so coffee brewing (3) until the desired amount
of espresso coffee has been obtained.
The button for manual espresso brewing may
be pressed and held to obtain additional porti-
on of coffee after the process of brewing cof-
fee with the use of the automatic function has
been nished.
A smaller portion of coffee may be obtained by pressing the main
switch or the brewing process may be stopped at any moment by
using the automatic brewing function.
Setting the temperature of espresso coffee
The appliance allows to obtain 2 temperature options of espresso coffee:
hot espresso,
very hot espresso.
Hot espresso coffee:
The appliance is factory set to brew hot espresso.
Follow the description under “Brewing espresso with the use of the au-
tomatic or the manual function “.
Very hot espresso coffee:
Follow the description of brewing hot espresso.
Press the temperature button (5) and when the pilot light of the main
button stops ashing and gives continuous light, wait a dozen or so
seconds – the water will then be heated more.
You can start brewing coffee.
Changing the set amount of espresso coffee
The programming process may be conducted while brewing espres-
so coffee:
Follow the description under “Brewing espresso with the use of the au-
tomatic or the manual function”.
Press and hold the automatic espresso brewing button (1 cup of es-
presso or 2 cups of espresso depending on which amount is to be pro-
grammed) until the desired amount of espresso has been obtained.
The programming has been completed.
WARNING:
To programme, the brewing time may not be shorter than 9 seconds,
otherwise the programming process may not be completed.
Restoring the factory settings for the amount of coffee:
Follow the description under “Rinsing the system for the espresso cof-
fee function”.
Press and hold the button for setting 1 cup of espresso, next press and
hold the main switch (press and hold both buttons).
Release the main switch after 10 seconds and then release the button
for setting 1 cup of espresso.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z010 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info