671484
162
Zoom out
Zoom in
Previous page
1/194
Next page
Troubleshooting
Miscellaneous Issues
162
P1048261-005 11/5/15
Miscellaneous Issues
Table 17 identifies miscellaneous issues with the printer, the possible causes, and the
recommended solutions.
For videos of some common procedures, go to http://www.zebra.com/zt200-info.
Table 17 • Miscellaneous Printer Problems
Problem Possible Cause Recommended Solution
The control panel
display shows a
language that I
cannot read
The language parameter was
changed through the control
panel or a firmware command.
1. On the control panel display, scroll
to LANGUAGE Menu.
2. Press OK to access the items in this
menu.
3. Use the UP ARROW or DOWN ARROW
to scroll through the language selections.
The selections for this parameter are
displayed in the actual languages to make it
easier for you to find one that you are able to
read.
4. Select the language that you want to display.
The display is missing
characters or parts of
characters
The display may need
replacing.
Call a service technician.
Changes in
parameter settings
did not take effect
Some parameters are set
incorrectly.
1. Check the parameters and change or reset if
necessary.
2. Turn the printer off (O) and then on (I).
A firmware command turned
off the ability to change the
parameter.
Refer to the Programming Guide for ZPL, ZBI,
Set-Get-Do, Mirror, and WML or call a service
technician.
A firmware command changed
the parameter back to the
previous setting.
If the problem persists, there
may be a problem with the
main logic board.
Call a service technician.
Non-continuous
labels are being
treated as continuous
labels.
The printer was not calibrated
for the media being used.
Calibrate the printer. See Calibrate the Ribbon
and Media Sensors on page 122.
The printer is configured for
continuous media.
Set the printer for the correct media type
(gap/notch, continuous, or mark). See Media
Type on page 94.
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zebra ZT230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zebra ZT230 in the language / languages: English as an attachment in your email.

The manual is 13,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zebra ZT230

Zebra ZT230 User Manual - German - 206 pages

Zebra ZT230 Quick start guide - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info