671480
98
Zoom out
Zoom in
Previous page
1/102
Next page
ZPL Configuration Status to Command Cross-reference
86
980608-001 Rev. C GK420d™ User Guide 8/4/10
Table 2 • ZPL Commands and Configuration Receipt Callout Cross-Reference
From this point in the Configuration Receipt listing, the printout has sensor settings and values
are displayed to troubleshoot sensor and media operations. These are typically used by Zebra
Tech Support to diagnose printer problems.
Command Listing Name Description
~SD DARKNESS Default: 10.0
^PR PRINT SPEED Default: 6 IPS / 152.4 mm/s (max.)
~TA TEAR OFF Default: +000
^MN MEDIA TYPE Default: GAP/NOTCH
SENSOR TYPE Default: WEB
SENSOR SELECT Default: AUTO (^MNA - Auto-Detect)
^PW PRINT WIDTH Default: 832 (dots)
^LL LABEL LENGTH Default: 1225 (dots) (the value constantly re-
calibrates with automatic Web-Gap detection
for label media)
^ML MAXIMUM LENGTH Default: 39.0IN 989MM
USB COMM. Connection Status: Connected / Not Connected
PARALLEL COMM. Connection Available: BIDIRECTIONAL
^SCa BAUD Default: 9600
^SC,b DATA BITS Default: 8 BITS
^SC,,c PARITY Default: NONE
^SC,,,,e HOST HANDSHAKE Default: DTR & XON/XOFF
^SC,,,,,f PROTOCOL Default: NONE
SER COMM. MODE Default: AUTO
CUTTER TYPE Option Present: LINER/TAG FULL (cut)
^CT / ~CT CONTROL CHAR Default: <~> 7EH
^CC / ~CC
COMMAND CHAR Default: <^> 5EH
^CD / ~CD DELIM./CHAR Default: <,> 2CH
^SZ ZPL MODE Default: ZPL II
^MFa MEDIA POWER UP Default: NO MOTION
^MF,b HEAD CLOSE Default: FEED
~JS BACKFEED Default: DEFAULT
^LT LABEL TOP Default: +000
^LS LEFT POSITION Default: +0000
~JD / ~JE HEXDUMP Default: NO (~JE)
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zebra GK420D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zebra GK420D in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info