99244
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
Wall Cabinet Fitting
Before fitting the cooker hood beneath any type of wall
cabinet ensure it is firmly fixed to the wall in accordance
with the manufacturers instructions.
1. Use the paper template provided to mark the hole
positions on the underside of the cabinet. Ensure
the front edges of the template are aligned with
the front edge of the cabinet carcase.
2. Check the distances are correct with a tape
measure as stated on the template. The four
holes are 5mm (1/4”) diameter.
3. If the ducting spigot is being used, cut a circular
hole, using a pad saw or similar cutter.
Fitting the Cooker Hood to the Wall
1. Lift the hood squarely to the wall slightly higher
than the brackets.
2. Lower the cooker hood until the cooker hood
locates onto the two brackets.
3. Ensure that the cooker hood is correctly located
before letting go.
To Level the Cooker Hood
1. Remove the lower grille by pressing inwardly on
the two slide catches located towards either side
of the grille towards the front. The grille will open
from the front.
2. Slide the right edge of the grille forward until it
clears the guide and then unhook the left hinge
pin.
3. Support the grille when removing it from the
guides carefully.
4. The two levelling screws will be visible towards
either end of the back panel.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi CH 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi CH 250 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info