99244
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
Venting
The hood is more effective when used in the extraction
setting (ducted to the outside).
Venting kits maybe purchased through your retailer or
DIY store, and must be ducted to an outside vent of
100mm (4”) minimum.
The ducting used must be manufactured
from fire retardant material which should
conform to the relevant British Standard
or DIN4102-B1.
When the hood is ducted externally the
charcoal filter must be removed and the slider
control must be in the ducting position.
To Fit the Ducting
1. Fit the ducting spigot and blanking plate, by
aligning the interlocking lugs on the fittings, with
the recesses in the aperture.
2. Insert and turn anti-clockwise to lock spigot and
blanking plate into position.
3. Remove the charcoal filter and ensure the slider
control is in the ducting position.
To Remove the Charcoal Filter
1. Open the visor and remove the metal inlet grille.
2. Carefully remove the screw from the centre of
the charcoal filter, while holding the filter securely.
3. The charcoal filter can now be removed.
Recirculation
The charcoal filter must be fitted for recirculation and
the slider control must be in the recirculation position.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi CH 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi CH 250 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info