478469
106
Zoom out
Zoom in
Previous page
1/116
Next page
104 FTM-10R OPERATING MANUAL
INSTALLATION OF OPTIONAL ACCESSORIES
BU-1 Bluetooth
®
ADAPTER UNIT
Please be sure to follow these safety precautions:
P Turn the transceiver power off, and disconnect all cables from the transceiver.
P Touch a metal place to discharge any static electricity from your body.
Installing the “BU-1” in the Front Panel
1. Remove the four screws securing the
Front Panel and then remove the Front
Panel from the Transceiver Body.
connector
BU-1
2. Disconnect the 8-pin modular plug
from the Transceiver.
3. Remove the screw affixing the Straight
Sub Panel, and then remove the
Straight Sub Panel from the Front
Panel.
4. Remove the four screws securing the
Rear Case of the Front Panel and re-
move the Rear Case from the Front
Panel.
Note: When you remove the rear case,
you will find a small thin green wire
near the flat ribbon cable. Be careful
not to cut or damage this wire.
5. Carefully align the connector on the
BU-1 with the connector on the Printed
Circuit Board, and gently press the
BU-1 into place.
6. Replace the Rear Case, Sub Panel, and
8-pin modular plug.
7. Attach the Front Panel to the Trans-
ceiver Body using the previously re-
moved four screws.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info