478469

Yaesu FTM-10R Manual

40
Zoom out
Zoom in
Previous page
1/116
Next page
38 FTM-10R OPERATING MANUAL
LABELING MEMORY
You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in
recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set (Menu) mode.
1. Recall the memory channel on which you wish to append a label.
2. Press and hold the key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M4 MEM TAG”.
4. Press the key briefly, then rotate the DIAL knob to se-
lect “ALPHA”.
5. Press and hold the key for one second to display the
previous label.
6. Press the PTT key to clear any previous label, if needed.
7. Rotate the DIAL knob to select the first digit of the desired label.
8. Press the key to move to next character.
9. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of eight characters may be used in the creation of a label.
10. If you make a mistake, press the key to backspace the cursor, then re-enter the
correct letter, number, or symbol.
Press the PTT key to delete all data after the cursor that may have been previously
stored erroneously.
11. When you have programmed a label that is under eight characters, press and hold in the
key for one second, until the “ALPHA” notation appears.
12. Press the
[
VOL/SEL
]
key to save the label and return to the memory recall mode. The
label (Alpha-Numeric Tag) will now be displayed.
To disable the Alpha-Numeric Tag (enabling the frequency display):
1. Recall the memory channel on which you wish the frequency to display.
2. Press and hold the key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M4 MEM TAG”.
4. Press the key briefly. Then, rotate the DIAL knob to select “FREQ”.
5. Press the
[
VOL/SEL
]
key to return to the memory recall mode. The memory channel
frequency will now be displayed.
MEMORY OPERATION
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info