478469

Yaesu FTM-10R Manual

38
Zoom out
Zoom in
Previous page
1/116
Next page
36 FTM-10R OPERATING MANUAL
MEMORY GROUP BANK
In the FTM-10R, the memory channel is assigned to the Group Memory Bank automati-
cally. The Group Memory Bank can be recalled by pressing the front panel / key (A
“GRP” notation appears at the upper left corner in the display for a moment.). You may
observe the Group Memory Bank between the Audio Line and 2 m Amateur Band.
You may assign/eliminate the memory channel to/from the Group Memory Bank. The elimi-
nated memory channel is only recalled by recalling the memory channel, which is stored in
the same operating band.
To eliminate the memory channel from the Group Memory bank:
1. Recall the memory channel you wish to delete from the Group Memory Bank.
2. Press and hold the key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M1 GROUP”.
Press the key briefly, then rotate the DIAL knob to se-
lect “OFF”; this deletes the current memory channel from
the Group Memory bank.
4. Press the
[
VOL/SEL
]
key to save the new setting and re-
turn to the memory recall mode.
To re-assign the eliminated memory channel into the Group Memory bank:
1. Press the front panel key to switch to the VFO mode, if needed.
2. Press the front panel / keys to recall the operating band which is the same band
as the eliminated memory channel.
3. Press the front panel key again to switch to the “Memory Recall” mode, and then
rotate the DIAL knob to select the memory channel you wish to re-assign into the Group
Memory bank.
4. Press and hold the key for one second to enter the Memory Channel Customization
mode.
5. Rotate the DIAL knob to select Menu Item “M1 GROUP”.
6. Press the key briefly, then rotate the DIAL knob to select “
ONON
ONON
ON”; the current memory
channel will be assigned into the Group Memory bank.
7. Press the
[
VOL/SEL
]
key to save the new setting and return to the memory recall mode.
MEMORY OPERATION
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info