Manual Yaesu FTDX1200 (page 77 of 140) (English)

674747

Zoom out

Zoom in

1/140

Page 75

1200 OPERATING MANUAL

SPLIT OPERATION USING THE TX CLARIFIER

For split T;5; operation in “casual” pile-ups, where the split is less than 10 kH], the T; Clari¿er 2ffset Tuning) fea-

ture may be utili]ed.

1. 3ress the

[

TX CLAR

]

button. The “

” icon will

appear in the TFT display.

QUICK POINT:

The Clarifier is freTuently used for receiver offset

tuning. However, for '; pile-ups where the ';

station is using a split of less than 10 kH], the T;

Clari¿er function is usually the Tuickest way to set

the transmitter to the desired offset freTuency.

. 5otate the

[

VFO-B/CLAR

]

knob to set the desired

transmitter offset. $ maximum split of . kH]

may be set.

3. To exit from T; Clari¿er operation, press the

[

CLAR

]

button once more. The “

” icon will disap-

pear from the display.

DVICE:



When listening to a “pile-up” calling a '; station,

in order to ¿nd the station currently being worked,

you may press the

[

RX CLAR

]

button. Then, use

the

[

VFO-B/CLAR

]

knob to ]ero in on the station

calling the '; use the S32T function on CW for

precise alignment of your freTuency). You may then

press the

[

RX CLAR

]

button again to cancel the 5;

Clari¿er, and return to reception on the '; station’s

freTuency.



-ust as with receiver Clari¿er operation, the amount

of offset from the original VF2 freTuency will ap-

pear in the display.



$s with receiver Clari¿er operation, when you turn

the T; Clari¿er off, the last-used offset is remem-

bered, and will be available if you turn the T; Clari-

¿er back on. To clear the Clari¿er offset, press the

[

CLEAR

]

button.

UICK POINT:

TRANSMITTER CONVENIENCE FEATURES

When attempting to work a '; station on CW in a split

freTuency pile-up, remember that a large number of

other stations may also be using Yaesu transceivers with

capability similar to that of your

1200

. 2n the ';

side of the pile-up, everyone calling precisely on the

same CW freTuency will sound like a single tone! So

you may have more success if you use the 5; Clari¿er

to ¿nd a hole in the pile-up, instead of trying to ]ero-

beat the last station worked by the '; station.

&ODUL¿HU2IIVHW,QGLFDWRU

$ visual depiction of the relative offset of the Clari¿er may be displayed, using the Tuning 2ffset Indicator.

[

VFO-B/CLAR

]

Knob

[

RX CLAR

]

Button

[

TX CLAR

]

Button

[

CLEAR

]

Button

1. 3ress the

[

]

button to engage the 0enu

mode.

. 5otate the

[

VFO-B/CLAR

]

knob or press the



button) to select 0enu item “

011 BAR

DISPLAY SELECT

”.

3. 3ress the [

SELECT

] button, then rotate the

[

VFO-B/CLAR

]

knob or press the



button)

to select “

CLAR

” from the available choices the

factory default is “

CW TUNE

”.

4. 3ress the

[

SELECT

]

button, then press the

[

]

button to save the new setting and exit

to normal operation.

Plus (+) Offset

Minus (-) Offset

TX Frequency = RX Frequency

Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FTDX1200 Manual

Product: