674747

Yaesu FTDX1200 Manual

75
Zoom out
Zoom in
Previous page
1/140
Next page
Page 73
FT
DX
1200 OPERATING MANUAL
VOX
(
SSB/AM/FM MODES:
AUTOMATIC TX/RX SWITCHING USING VOICE CONTROL
)
Instead of using the microphone
PTT
switch or the front panel
[
MOX
]
switch to activate the transmitter, the V2; Vo i c e
2perated T;5; Control) system provides hands-free, automatic activation of the transmitter, based on voice input into
the microphone.
1. 3ress the
[
S
/
T
/
W
/
X
]
button to select the “
VOX
”,
then press the
[
SELECT
]
button to select “
ON
” .
The “
VOX
” will appear in the display.
. Without pressing the
PTT
switch, speak into the
microphone in a normal voice level. When you start
speaking, the transmitter should be activated auto-
matically. When you ¿nish speaking, the transceiver
should return to the receive mode after a short de-
lay).
3. To cancel V2; and return to
PTT
operation, press
the
[
SELECT
]
button once more. The “
VOX
” will
turn off, signifying that the V2; circuitry has been
turned off.
A
DVICE:
The V2; Gain may be adjusted to prevent acciden-
tal transmitter activation in a noisy environment. To
adjust the V2; Gain
1) $ctivate the V2; circuitry, if necessary.
) 3ress the
[
MENU
]
button to engage the 0enu
mode.
3) 5otate the
[
VFO-B/CLAR
]
knob or press the
S
T
button) to select 0enu item “
181 VOX
GAIN
”, then press the
[
SELECT
] button
.
4) While speaking into the microphone, rotate the
[
VFO-B/CLAR
]
knob or press the
S
T
button)
to the point where the transmitter is Tuickly ac-
tivated by your voice, without background noise
causing the transmitter to activate.
) When you satisfied with the setting, press the
[
SELECT
]
button, then press the
[
MENU
]
but-
ton to save the new setting and exit to normal
operation.
The “Hang-Time” of the V2; system the transmit
receive delay after the cessation of speech) may also
be adjusted via the 0enu mode. The default delay is
00 msec. To set a different delay time
1) $ctivate the V2; circuitry, if necessary.
) 3ress the
[
MENU
]
button to engage the 0enu
mode.
3) 5otate the
[
VFO-B/CLAR
]
knob or press the
S
T
button) to select 0enu item “
182 VOX DE-
LAY
”, then press the
[
SELECT
] button
.
4) 5otate the
[
VFO-B/CLAR
]
knob while saying a
brief syllable like “$h” and listening to the hang
time for the desired delay.
) When you are satisfied with the setting, press
the
[
SELECT
]
button, then press the
[
MENU
]
button to save the new setting and exit to normal
operation.
TRANSMITTER CONVENIENCE FEATURES
The $nti-Trip setting adjusts the level of negative re-
ceiver audio feedback to the microphone, to prevent
receiver audio from activating the transmitter via
the microphone). This setting can also be adjusted
via 0enu item “
183 ANTI VOX GAIN
”.
V2; operation may be engaged on either Voice
modes SSB$0F0) or on $FS.-based 'ata
modes. Use 0enu item “
180 VOX SELECT
” the se-
lections are “
MIC
” and “
DATA
”).
[
VFO-B/CLAR
]
Knob
[
MENU
]
Button
[
SELECT
]
Button
[
S
/
T
/
W
/
X
]
Button
… 75 …


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info