674754
7
Zoom out
Zoom in
Previous page
1/156
Next page
Page 5FT DX 9000D OPERATION MANUAL
4. Connecting and Selecting the Microphone
The FT DX 9000D comes equipped with two microphone connectors: the front panel includes a “Cannon” (XLR) three-pin
connector, while the rear panel provides an eight-pin (round) connector.
As shipped from the factory, the front panel XLR connector is engaged for operation, and the rear panel 8-pin microphone
jack is not connected. If you wish to enable the 8-pin connector instead of the XLR connector, use the Menu to accomplish
this. Note that you may leave microphones connected to both jacks, and may select the microphone you want for operation
on a particular operating mode (SSB, AM, FM, etc.), as well!
Ì Press the MNU (Menu) key momentarily to enter
the Menu Mode.
Ì Rotate the Main Tuning Dial to select Menu Item
#69, located within the “MODE SSB” group: SSB MIC
SELECT.
Ì Rotate the CLAR/VFO-B knob to change the set-
ting of Menu #069 from “FRONT” to “REAR.”
Ì Press and hold in the MNU (Menu) key for two sec-
onds to save the new setting and exit to normal opera-
tion.
Ì In a similar manner, you may use Menu #040 (AM
MIC SEL) in the MODE-AM Menu Group to select
the microphone jack to be used during AM operation,
and Menu #059 (FM MIC SEL) in the MODE-FM
Menu Group to select the microphone to be used dur-
ing FM transmission.
5. Extending the Front Feet
In order to elevate the front panel for easy viewing, the front left and right feet of the bottom case may be extended.
Ì Pull the front legs outward from the bottom panel.
Ì Rotate the legs counter-clockwise to lock them in the
extended position. Be sure the legs have locked se-
curely in place, because the transceiver is quite heavy
and an unlocked leg could result in damage, should
the transceiver move suddenly.
Before You Begin. . .
“FRONT”
Cannon (XLR)
three-pin connector
“REAR”
8-pin microphone jack
Main Tuning Dial
MNU key
CLAR/VFO-B Knob
Retracting the Front Feet
Ì Rotate the legs clockwise, and push them inward while
rotating to the right.
Ì The front feel should now be locked in the retracted
position.
EXTEND
RETRACT
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info