674754
6
Zoom out
Zoom in
Previous page
1/156
Next page
Page 4 FT DX 9000D OPERATION MANUAL
Before You Begin. . .
1. Connecting AC Power
There are two power switches on this transceiver, one each on the rear and front panels. If the rear panel’s Power switch is
not turned on, the front panel Power switch will not function.
Ì Push the rear panel’s Power
switch to the I position
to apply power from the
power supply to the OCXO
(Reference Crystal Oven)
and to enable the front panel
power switch.
Ì Press and hold in the front
panel Power switch for two
seconds to turn the trans-
ceiver on.
Note
The opening screen will appear on the TFT display, and
the self-check function of the CPU inside the radio will
begin. Then, the µ-Tuning circuitry will receive the data
from the CPU, and it will perform its own self-check, and
will preset itself to the proper settings for the current op-
erating frequency.
While the µ-Tuning circuitry is obtaining the data, the drive
mechanism will move from one end of its range to the
other end (fast), and this will cause a temporary “motor”
noise that can be heard; this, does not represent any trouble
or problem.
When the radio is turned on for the first time, it takes about
50 seconds (from turning the radio on to completing the
self-check) until the radio becomes ready to use; how-
ever, from the next time you turn it on, it will take around
10 seconds until the transceiver is ready for full opera-
tion.
2. Setting Your Local Time
When first turning on the FT DX 9000, be sure to set the local time to match your location's time zone. If you do not do this,
several functions will not work correctly, including the World Clock, Great Circle Map, etc.; please see the appropriate
section of the TFT Operating Manual for details on Local Time Setup.
3. Configuring Your FT DX 9000 Using the Menu
The FT DX 9000 is configured, at the factory, with its various functions set up in a manner typical for most operation. Via
the “Menu” system, you may change these settings to match the way you want your transceiver to operate.
Menu programming is enabled by pressing the MNU
(Menu) key momentarily. You may then rotate the Main
Tuning Dial to display the desired Menu item, in the menu
list, on the TFT. Each of the settings can be changed or
customized via the CLAR/VFO-B knob, as you like, in
this mode.
Once you have made a change to the configuration of a
Menu item or items, you must press and hold in the
MNU (Menu) key for two seconds to save the new set-
tings and exit to normal operation.
If you wish to cancel a change to a Menu item or items,
just press the MNU key momentarily. If you do not press
and hold in the MNU key in for two seconds, any changes
you have made will not be saved.
Main Tuning Dial
MNU key
CLAR/VFO-B Knob
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info