674740
134
Zoom out
Zoom in
Previous page
1/154
Next page
Page 132 FT-991 OperaTing Manual
081 RPT SHIFT 50MHz
Function: Sets the RPT offset frequency on the 50 MHz
band.
Available Values: 0 - 4000kHz (10kHz/step)
Default Setting: 1000kHz
Description: Sets the repeater offset frequency on the 50
MHz band.
082 RPT SHIFT 144MHz
Function: Sets the RPT offset frequency on the 144
MHz band.
Available Values: 0 - 4000kHz (10kHz/step)
Default Setting: 600kHz
Description: Sets the repeater offset frequency on the
144 MHz band.
083 RPT SHIFT 430MHz
Function: Sets the RPT offset frequency on the 430
MHz band.
Available Values: 0 - 10000kHz (10kHz/step)
Default Setting: 5000kHz
Description: Sets the repeater offset frequency on the
430 MHz band.
084 ARS 144MHz
Function: Sets the ARS function on the 144 MHz band.
Available Values: OFF/ON
Default Setting: ON
Description:
OFF:
Disables the ARS function.
ON:
Enables the ARS function.
085 ARS 430MHz
Function: Sets the ARS function on the 430 MHz band.
Available Values: OFF/ON
Default Setting: ON
Description:
OFF:
Disables the ARS function.
ON:
Enables the ARS function.
086 DCS POLARITY
Function: Selects the DCS code polarity.
Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv
Default Setting: Tn-Rn
Description: When using the DCS function, the trans-
ceiver can transmit/receive the DCS code with the
phase reversed.
Tn-Rn:
Transmit (in phase), receive (in phase)
Tn-Riv:
Transmit (in phase), receive (reverse phase)
Tiv-Rn:
Transmit (reverse phase), receive (in phase)
Tiv-Riv:
Transmit (reverse phase), receive (reverse phase)
087 RADIO ID
Function: Displays the unique transceiver ID assigned at
the time of shipment (5-digit alphanumeric charac-
ters).
Available Values: Cannot be changed.
Default Setting: Differs depending on the transceiver.
088 DIGITAL SQL TYPE
Function: Sets the squelch type in digital mode.
Available Values: OFF/CODE/BREAK
Default Setting: OFF
Description: Selects the squelch type in digital mode.
OFF:
Outputs the audio whenever the transceiver
receives a digital signal from another YAESU
transceiver.
CODE:
The audio is output only when the SQL code of
the received signal matches the setting.
BREAK:
With the BREAK setting on, the audio is output,
whenever a signal is received from another sta-
tion with the BREAK setting on, regardless of
the code setting.
089 DIGITAL SQL CODE
Function: Sets the squelch code for digital mode.
Available Values: 001 - 126
Default Setting: 001
090 GM DISPLAY
Function: Sorts the group stations to be displayed when
using the GM function.
Available Values: DISTANCE/STRENGTH
Default Setting: DISTANCE
Description:
DISTANCE:
Active group member stations are displayed ac-
cording to their distance from this station, begin-
ning with the closest member station.
STRENGTH:
Active group member stations are displayed ac-
cording to their signal strengths, beginning with
the strongest signal rst.
091 DISTANCE
Function: Sets the unit of measure to indicate the dis-
tance between your station and communication sta-
tions when using the GM function.
Available Values: km/mile
Default Setting: mile
Menu MoDe
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info