674740
129
Zoom out
Zoom in
Previous page
1/154
Next page
Page 127FT-991 OperaTing Manual
028 GPS/232C SELECT
Function: Selects functions of the
GPS/CAT
jack.
Available Values: GPS1/GPS2/RS232C
Default Setting: GPS1
Description: Select the device that is to be connected to
the
GPS/CAT
jack on the rear panel.
GPS1:
Enables connection to an external GPS device.
GPS2:
Enables connection to an external GPS device,
and displays the location information in real time.
RS232C:
Enables connection for input of CAT commands.
029 232C RATE
Function: Sets the baud rate for a
GPS/CAT
jack com-
mand input.
Available Values: 4800/9600/19200/38400 bps
Default Setting: 4800 bps
Description: Sets the baud rate for an
RS-232C
com-
mand input.
030 232C TOT
Function: Sets the Time-Out Timer for an
RS-232C
command input.
Available Values: 10/100/1000/3000 (msec)
Default Setting: 10msec
Description: Sets the Time-Out Timer countdown time
for a
RS-232C
command input.
031 CAT RATE
Function: Sets the baud rate for a CAT command input.
Available Values: 4800/9600/19200/38400 bps
Default Setting: 4800 bps
Description: Sets the baud rate for a CAT command input.
032 CAT TOT
Function: Sets the Time-Out Timer for a CAT command
input.
Available Values: 10/100/1000/3000 (msec)
Default Setting: 10msec
Description: Sets the Time-Out Timer countdown time
for a CAT command input.
033 CAT RTS
Function: Congures the CAT RTS port setting.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
Description: Monitors the computer using the RTS signal.
ENABLE:
Monitors the computer status using the RTS signal.
DISABLE:
Disables the monitoring function.
034 MEM GROUP
Function: Sets the memory group function.
Available Values: ENABLE/DISABLE
Default Setting: DISABLE
Description: Set this setting to “
ENABLE
” to divide the
memory channels into 6 groups.
035 QUICK SPLIT FREQ
Function: Selects the amount of frequency offset when
the Quick Split feature is enabled.
Available Values: −20 - 0 - 20kHz (1kHz/step)
Default Setting: 5kHz
Description: Sets the amount of frequency offset when
the Quick Split feature is enabled.
Advice: Press and hold the
SPLIT
button on the front
panel to activate VFO-B split frequency opera-
tion, thereby offsetting the transmitter by the
specied frequency.
Each time the
SPLIT
button is pressed and
held, the offset frequency is increased by the
setting amount.
036 TX TOT
Function: Sets the Time-Out Timer countdown time.
Available Values: OFF/1 - 30min
Default Setting: OFF (10 min, European Version)
Description: Forces the transceiver to return to receiv-
ing mode after continuous transmission of the pro-
grammed time.
037 MIC SCAN
Function: Sets the microphone automatic scanning func-
tion to ON or OFF.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
Description: Selects the operation of the
UP/DWN
but-
tons on the microphone.
ENABLE (ON):
Starts scanning automatically by pressing and
holding the
UP/DWN
button for 1 second or
more (Scanning continues even after releasing
the button). To stop scanning, press the
UP/DWN
button again briey or press the
PTT
button to
transmit.
DISABLE (OFF):
Scans only while pressing and holding the
UP/
DWN
button. To stop scanning, release the but-
ton.
038 MIC SCAN RESUME
Function: Sets the Scan Resume function.
Available Values: PAUSE/TIME
Default Setting: TIME
Description: Sets the Scan Resume function (in AM/FM
mode).
PAUSE:
During automatic scanning, the scanner will hold
until the signal disappears.
TIME:
If the signal does not disappear within ve sec-
onds, the scanner will resume scanning for the
next active channel (frequency). If there is no
signal, the scanner continues scanning automati-
cally.
Menu MoDe
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info