674740

Yaesu FT-991 Manual

90
Zoom out
Zoom in
Previous page
1/154
Next page
Page 88
FT-991 OperaTing Manual
conteSt MeMory keyer
text MeSSAge progrAMMing
1. Press the
MODE
button to set the operating mode to
CW.
2. Be sure that Break-in is “Off” with
[
BK-IN
]
on the
LCD, if necessary.
3. Touch
[
MEM
]
on the LCD or press the
FH-2
[
MEM
]
key. A blinking “
REC
” icon will appear in the dis-
play.
4. Touch
[
CH1
]
-
[
CH5
]
on the LCD or press an
FH-2
[
1
]
-
[
5
]
key to select the desired CW Memory Reg-
ister into which you wish to program the text. The
text input screen will appear.
5. Touch a key on the LCD to enter the letters, num-
bers, or symbols of the desired label.
6. Repeat step 5 to program the remaining letters, num-
bers, or symbols of the desired text. 12 characters
may be used in the creation of a text.
Use
[
]
and
[
]
on the LCD to set the cursor posi-
tion and
[ ]
on the LCD to erase a letter at the left
of the cursor.
7. When you have completed the creation of the text,
touch
[
ENT
]
on the LCD.
Advice:
Use the
FH-2
[
]
and
[
]
keys to set the cursor posi-
tion and use the
FH-2
’s
[
]
and
[
]
keys to choose
the letter/number to be programmed in each slot of the
memory. In the case of the second example on the previ-
ous page the “
#
” character designates the slot where the
Contest Number will appear.
8. When the message is complete, add the “
}
” character
at the end to signify the termination of the message.
9. Touch
[
MEM
]
on the LCD or press and hold in the
FH-2
[
MEM
]
key for one second to exit, once all
characters (including “
}
”) have been programmed.
checking the cW MeMory contentS
1. Be sure that Break-in is still turned “Off” with
[
BK-
IN
]
on the LCD.
2. Touch
[
MONI
]
on the LCD to enable the CW moni-
tor.
3. Touch
[
CH1
]
-
[
CH5
]
on the LCD or press an
FH-2
[
1
]
-
[
5
]
key, whichever memory you just recorded
in. You will hear the results in the sidetone, but no
RF energy will be transmitted.
cw convenience features
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info