674740

Yaesu FT-991 Manual

88
Zoom out
Zoom in
Previous page
1/154
Next page
Page 86
FT-991 OperaTing Manual
checking the cW MeMory contentS
1. Be sure that Break-in is still turned “Off” by
[
BK-IN
]
on the LCD.
2. Touch
[
MONI
]
on the LCD to enable the CW moni-
tor.
3. Touch
[
CH1
]
-
[
CH5
]
on the LCD or press the
FH-2
[
1
]
-
[
5
]
key, whichever memory you just recorded
in. You will hear the message played in the sidetone
monitor, but no RF energy will be transmitted.
on-the-Air cW MeSSAge plAybAck
1. Touch
[
BK-IN
]
on the LCD to enable transmission.
Either Full- or Semi-break-in will be engaged, de-
pending on the setting of Menu item “
056 CW BK-
IN TYPE
”.
2. Touch
[
CH1
]
-
[
CH5
]
on the LCD or press the
FH-2
[
1
]
-
[
5
]
key, depending on which CW Memory Reg-
ister message you wish to transmit. The programmed
message will be transmitted on the air.
note:
If you subsequently decide to use the “Text Memory”
technique for memory storage, please note that a mes-
sage stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique”
on a particular memory register (the Menu Mode Setting
is set to “
TEXT
”).
conteSt MeMory keyer
MeSSAge MeMory progrAMMing
(
uSing your pAddle
)
1. Set the operating mode to CW.
2. Set
[
BK-IN
]
on the LCD to “Off”.
3. Set
[
KEYER
]
on the LCD to “On”.
4. Touch
[
MEM
]
on the LCD or press the
[
MEM
]
key
on the
FH-2
. A blinking “
REC
” icon will appear in
the display.
5. Touch
[
CH1
]
through
[
CH5
]
on the LCD or press
any of the
FH-2
keys numbered
[
1
]
through
[
5
]
to
begin the memory storage process, and the “
REC
”
icon will glow steadily.
6. Send the desired message using your keyer paddle.
Advice:
If you do not start keying within ten seconds, the
memory storage process will be cancelled.
7. Touch
[
MEM
]
on the LCD or press the
[
MEM
]
key
on the
FH-2
once more at the end of your message.
Up to 50 characters may be stored in each of the ve
memories.
note:
Care must be exercised when sending to ensure that the
spaces between letters and words are accurately done;
if the timing is off, the spacing may not come out right
in the stored message. For ease in setting up the keyer
memories, we recommend setting Menu item “
012
KEYER TYPE
” to “
ACS
” (Automatic Character Spacing)
while programming the keyer memories.
cw convenience features
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info