674740
72
Zoom out
Zoom in
Previous page
1/154
Next page
Page 70
FT-991 OperaTing Manual
vox
(
SSb/AM/FM ModeS:
AutoMAtic tx/rx SWitching uSing voice control
)
Instead of using the microphone
PTT
switch or the [
MOX
] function (that may be displayed by pressing the
F(M-LIST)
button) to activate the transmitter, the VOX (Voice Operated Transmit) system may be used for hands-free activation of
the transmitter, by the voice input to the microphone.
1. Press the
F(M-LIST)
button, to reveal the functions
list on the TFT LCD display, then touch
[
VOX
]
on
the LCD to activate the function, “
ON
” will appear
in the display.
MULTI Knob
MENU(SETUP) Button
F(M-LIST) Button
2. Without pressing the
PTT
switch, speak into the
microphone in a normal voice level. When you start
speaking, the transmitter should be activated auto-
matically. When you nish speaking, the transceiver
should return to the receive mode (after a short de-
lay).
3. To cancel VOX and return to
PTT
operation, touch
[
VOX
]
on the LCD once more. The “
VOX
” indica-
tion will turn OFF, signifying that the VOX circuitry
has been turned off.
Advice:
The VOX Gain may be adjusted to prevent acciden-
tal transmitter activation in a noisy environment. To
adjust the VOX Gain:
1) Activate the VOX circuitry, if necessary.
2) Press the
MENU(SETUP)
button to engage the
Menu mode.
3) Rotate the
MULTI
knob to select Menu item “
145
VOX GAIN
”, then touch
[
SELECT
]
on the LCD.
881::&'#.; OUEG
81::)#0+
81 5.' '%6 /++%

:
4) While speaking into the microphone, rotate the
MULTI
knob to the point where the transmitter
is quickly activated by your voice, without back-
ground noise causing the transmitter to activate.
5) When you are satisfied with the setting, touch
[
ENTER
]
on the TFT LCD display to save the
new setting.
881::&'#.; OUEG
81:)#0+
81 5.' '%6 /++%


:
transMitter convenience features
4) Rotate the
MULTI
knob while saying a brief syl-
lable like “Ah” and listening to the hang time for
the desired delay.
6) Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
The “Hang-Time” of the VOX system (the transmit/
receive delay after the cessation of speech) may also
be adjusted via the Menu mode. The default delay is
500 msec. To set a different delay time:
1) Activate the VOX circuitry, if necessary.
2) Press the
MENU(SETUP)
button to engage the
Menu mode.
3) Rotate the
MULTI
knob to select Menu item “
146
VOX DELAY
”, then touch
[
SELECT
]
on the
LCD.
881::&'#.; OUEG
81::)#0+
81 5.' '%6 /++%

:
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info