674740
70
Zoom out
Zoom in
Previous page
1/154
Next page
Page 68
FT-991 OperaTing Manual
voice MeMory
(
SSb/AM ModeS
)
You may utilize the Voice Memory capability of the
FT-991
for repetitive messages. The Voice Memory system
includes ve memories capable of storing up to 20 seconds of voice audio each. The maximum that any memory can
hold is 20 seconds.
Voice Memory Operation
You may also utilize the Voice Memory capability of the
FT-991
by operating from the display or the optional
FH-2
Remote Control Keypad, which plugs into the rear panel
REM/ALC
jack.
Recording Your Own Voice in Memory
1. Select the LSB, USB, or AM mode using the front
panel
MODE
button.
2. Adjust
[
MIC GAIN
]
on the LCD, as described on
page 59.
3. Touch
[
MEM
]
on the LCD or press the
[
MEM
]
key
on the
FH-2
. A blinking “
REC
” icon will appear in
the display.
4. Touch
[
CH1
]
through
[
CH5
]
on the LCD or press
any of the
FH-2
keys numbered
[
1
]
through
[
5
]
to
select that memory storage register.
Advice:
If you do not press the
PTT
key (see next step) with-
in ve seconds, the memory storage process will be
cancelled.
5. Press the microphone
PTT
switch momentarily. The
REC
” icon will glow steadily and recording will
begin.
6. Speak into the microphone in a normal voice level to
record the message (such as “CQ DX, CQ DX, this
is W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Char-
lie, Over”). Remember that the time limit for record-
ing any message is 20 seconds.
Checking Your Recording
1. Be sure that
[
VOX
]
and
[
BK-IN
]
functions are “Off”
so transmit will not be activated. The function status-
es may be observed on the TFT display by pressing
the
F(M-LIST)
button.
2. Touch
[
CH1
]
-
[
CH5
]
on the LCD or press the
FH-2
[
1
]
-
[
5
]
key (whichever register you just recorded
in). The “
PLAY
” icon will appear in the display and
you will hear the contents of the Voice Memory you
just recorded.
Advice:
The playback level of the recording may be adjusted via
Menu item “
010 DVS RX OUT LEVEL
”.
7. Touch
[
MEM
]
on the LCD or press the
FH-2
[
MEM
]
key to complete the message storage process.
transMitter convenience features
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info