674740
25
Zoom out
Zoom in
Previous page
1/154
Next page
Page 23
F
T-991
OperaTing Manual
tFt liquid cryStAl diSplAy
about the DisplaY
PLAY
The voice memory/contest memory keyer func-
tions are in use.
PLAY: Playing, REC: Recording
REC
S-Meter
Displays the reception signal strength.
To change the meter peak hold time
1. Press the
MENU(SETUP)
button.
2. Rotate the
MULTI
knob to select “
009 BAR
MTR PEAK HOLD
”.
3. Touch
[
SELECT
]
, then rotate the
MULTI
knob to select the time to hold
(OFF/0.5/1.0/2.0 seconds).
4. Touch
[
ENTER
]
, then
[
BACK
]
or press the
MENU(SETUP)
button.
Meters
The following information can be displayed below the
S-meter.
The displayed information is switched each time [
ME-
TER
] is touched on the panel.
PO Displays transmitter output power.
ALC Displays ALC voltage
SWR Displays antenna matching state
COMP Displays the speech processor compression level
ID
Displays the drain current of the nal stage FET
transistors
VDD
Displays the drain voltage of the nal stage ampli-
er.
The proper voltage is 13.8 V.
Scope/Waterfall
Displays a spectrum or waterfall when the scope func-
tion (see page 40) is in use.
Menu List
Displays the menu item list when making settings in the
menu mode.
Memory List
Displays the data saved in the memory channels.
Function Menu
Displays the function menu from which you can set a
variety of functions.
Touch
[
BACK
]
/
[
FWD
]
to switch the menu screen.
Operation Frequency
Displays the current operation frequency.
Clock
Indicates the current time.
When receiving a GPS signal, the time is set automati-
cally.
GPS Signal Capturing Indicator
Appears when an external GPS device is connected to
the
GPS/CAT
jack on the rear panel and GPS signals
are being acquired.
VFO-B Data/Clarier Operation
Displays operation status of the radio modulation form
and VFO-B frequency, etc.
Displays the offset operation status and the clarier off-
set value, etc.
Main Control Buttons (SWAP)
Frequently used functions can be assigned to these but-
tons.
To change the function assigned
to the main control button
1. Press the
F(M-LIST)
button.
2. Touch
[
BACK
]
/
[
FWD
]
to display screens
SWAP F1
” to “
SWAP F4
”.
3. Touch one of the “
SWAP F1
” to “
SWAP
F4
” screens and conrm the function you
want to change ashes.
4. Touch
[
BACK
]
/
[
FWD
]
to display the func-
tion you want to assign, then select and
touch the function.
5. Press the
F(M-LIST)
button.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info