674740
23
Zoom out
Zoom in
Previous page
1/154
Next page
Page 21
F
T-991
OperaTing Manual
front panel controls & switches
Main Tuning Dial Knob
This large knob adjusts the operating frequency of
VFO-A.
Rotate clockwise to increase the operating frequency
and rotate counter-clockwise to decrease the operat-
ing frequency.
operAting Mode 1 Step 1 diAl rotAtion
LSB/USB/CW/RTTY/
DATA-LSB/DATA-
USB/AM
5 Hz (100 Hz)
10 Hz (100 Hz)
1 kHz (200 kHz)
2 kHz (20 kHz)
FM/DATA-FM/C4FM 100 Hz (1 kHz) 20 kHz (200 kHz)
Numbers in parentheses indicate steps when the FAST button is On.
Advice:
The tuning steps for the Main Dial knob are set
at the factory to: 10Hz (SSB/AM), 5 Hz (CW/
RTTY/DATA-LSB/DATA-USB) and 100 Hz (FM/
DATA-FM/C4FM) per step.
In LSB, USB, CW, RTTY, DATA-LSB or DATA-
USB mode, the frequency change amount (step
width) may be toggled between “
5Hz
” and “
10Hz
by pressing the
F(M-LIST)
button, and then touch-
ing [
5/10Hz
] on the LCD.
FAST Button
Pressing this button will change the tuning of the
Main Tuning Dial knob (VFO-A) to a higher step
rate.
Press this button to double the main dial frequency
variation. “
” in the LED indicator area will light
up.
Press this button again to restore the frequency varia-
tion to the original value. “
” will disappear.
LOCK Button
This button toggles on/off locking of the Main Tun-
ing Dial knob.
Press this button to lock the main dial operations.
” will light up in the LED indicator area.
Press this button again to unlock the main dial opera-
tions. “ ” will disappear.
CLAR Button
During reception, press this button, then rotate the
CLAR/VFO-B
knob to adjust the VFO-A
RX clarier offset value (see page 34).
m
The clarier offset value (frequency) can be re-
stored to “0 (zero)” by pressing the
CLAR
button
for more than 1 second.
m
Depending on the menu mode
040 CLAR
MODE SELECT
” setting, this button can work as
the TX clarifier for changing only the transmit
frequency (see page 73) or RX/TX clarifier for
both receiving and transmitting (see page 34,
73).
V/M Button
This button toggles frequency control between VFO-
A and the memory system.
m
Pressing this button alternately recalls the VFO
frequency data and the frequency data saved in a
memory channel by turns.
A
M Button
Pressing and holding this key for one second (until
the double beep) copies the current operating data
into the currently selected memory channel, over-
writing any previous data stored there.
Press this button briey to display the memory check
function screen, where the data saved in a memory
channel may be reviewed.
m
While displaying memory data, rotate the
MULTI
knob to review the data in each memory channel.
Press this button again, to close the memory list
screen.
SPLIT Button
Press this button to operate split frequency between
VFO-A (used for reception) and VFO-B (used for
transmission) (see page 74).
m
Press and hold in the
SPLIT
button for one sec-
ond to engage the “Quick Split” (see page 74)
feature. VFO-B transmit will automatically be
set to a frequency 5 kHz higher than the VFO-A
receive frequency, with the same operating mode.
The transceiver will operate in the Split mode.
CLAR/VFO-B Knob
During the VFO-A operation, rotate this knob to ad-
just the clarier.
During Split operation, this knob adjusts the operat-
ing frequency of VFO-B.
RF GAIN Knob
Adjust the receiver gain of the high frequency and
mid-range frequency amplier stages.
m
Rotate the knob clockwise to increase the gain.
Rotate the knob fully clockwise to set the gain to
the highest level for normal operations.
AF GAIN Knob
The
AF GAIN
knob sets the receiver audio volume
level.
m
Rotate the knob clockwise to increase the receiv-
er audio volume level.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991 in the language / languages: English as an attachment in your email.

The manual is 30,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info