478500
66
Zoom out
Zoom in
Previous page
1/76
Next page
Page 64 FT-897D OPERATING MANUAL
CAT
(
COMPUTER AIDED TRANSCEIVER
)
O
PERATION
Command Title Parameter Opcode Notes
LOCK ON/OFF CMD
CMD = 00 : LOCK ON
CMD = 80 : LOCK OFF
PTT ON/OFF CMD
CMD = 08 : PTT ON
CMD = 88 : PTT OFF
Set Frequency P1 P2 P3 P4 01
P1 ~ P4 : Frequency Digits
01, 42, 34, 56, [01] = 14.23456 MHz
P1 = 00 : LSB, P1 = 01 : USB, P1 = 02 : CW,
Operating Mode P1 07 P1 = 03 : CWR, P1 = 04 : AM, P1 = 08 : FM,
P1 = 0A : DIG, P1 = 0C : PKT P1 = 88 : FMN,
CLAR ON/OFF CMD
CMD = 05 : CLAR ON
CMD = 85 : CLAR OFF
CLAR Frequency P1 P3 P4 F5
P1 = 00 : “+” OFFSET P3, P4 : CLAR Frequency
P1 = 00 : “-” OFFSET 12, 34 = 12.34 kHz
VFO-A/B 81 Toggle
SPLIT ON/OFF CMD
CMD = 02 : SPLIT ON
CMD = 82 : SPLIT OFF
P1 = 09 : “-” SHIFT
Repeater Offset P1 09 P1 = 49 : “+” SHIFT
P1 = 89 : SIMPLEX
Repeater Offset Frequency P1 P2 P3 P4 F9
P1 ~ P4 : Frequency Digits
05, 43, 21, 00, [F9] = 5.4321 MHz
P1 = 0A : DCS ON
P1 = 0B : DCS DECODER ON
P1 = 0C : DCS ENCODER ON
CTCSS/DCS Mode P1 0A P1 = 2A : CTCSS ON
P1 = 3A : CTCSS DECODER ON
P1 = 4A : CTCSS ENCODER ON
P1 = 8A : OFF
CTCSS Tone P1 P2 P3 P4 0B
P1 ~ P2 : CTCSS Tone Frequency for TX (Note 1)
P3 ~ P4 : CTCSS Tone Frequency for RX (Note 1)
DCS Code P1 P2 P3 P4 0C
P1 ~ P2 : DCS Code for TX (Note 2)
P3 ~ P4 : DCS Code for RX (Note 2)
Read RX Status E7 (Note 3)
Read TX Status F7 (Note 4)
Read RX Status 03 (Note 5)
Note 1: CTCSS Tone
Example: Set the CTCSS Tone Frequncy to 88.5 Hz (TX)
and 100.0 Hz (RX)
P1 P2 P1 P2
08 85 10 00 = 88.5 Hz (TX), 100.0 Hz (RX)
Note 2: DCS Code
Example: Set the DCS Code to 023 (TX) and 371 (RX)
P1 P2 P1 P2
00 23 03 71 = 023 (TX), 371 (RX)
Note 3: Read RX Status
Opcode Command Chart
76543210
PO Meter DataPO Meter Data
HI SWR Status
0: HI SWR "OFF"
1: HI SWR "ON"
SPLIT Status
0: SPLIT "ON"
1: SPLIT "OFF”
Dummy Data
PTT
76543210
S Meter Data
Dummy Data
Squelch Status
0: Squelch "OFF" (Signal present)
1: Squelch "ON" (No signal)
CTCSS/DCS Code
0: CTCSS/DCS Code is Matched
1: CTCSS/DCS Code is Un-Matched
CTCSS/DCS OFF:0
Discriminator Centering
0: Discriminator is Centered
1: Discriminator is Off-Center
SSB/CW/AM mode:0
Note 4: Read TX Status
DATA 1 DATA 2 DATA 3 DATA 4 DATA 5
MODE
100/10MHz
1MHz/100kHz 100/10Hz
10/1kHz
43 97 00 00
00=LSB, 01=USB
02=CW, 03=CWR
04=AM,
06=WFM, 08=FM
0A=DIG, 0C=PKT
Note 5: Read Frequency & Mode Status
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info