478500
19
Zoom out
Zoom in
Previous page
1/76
Next page
Page 17FT-897D OPERATING MANUAL
FRONT PANEL CONTROL & SWITCHES
Multi Function Row “o”
(
MFo
)
[
PLY1, PLY2, PLY3
]
[
A
]
Key: PLY1
Press the
[
A
](
PLY1
)
key to send the CW message which is memorized in BEACON TEXT 1.
[
B
]
Key: PLY2
Press the
[
B
](
PLY2
)
key to send the CW message which is memorized in Keyer BEACON TEXT 2.
[
C
]
Key: PLY3
Press the
[
C
](
PLY3
)
key to send the CW message which is memorized in Keyer BEACON TEXT 3.

[
A
][
B
][
C
]
Multi Function Row “n”
(
MFn
)
[
CFIL,--------,--------
]
[
A
]
Key: CFIL
Press the
[
A
](
CFIL
)
key to select the 2.4 kHz ceramic IF filter.
[
B
]
Key
Press the
[
B
]
key to select the optional IF filter which is located on the “FIL-1” (Optional Filter 1) slot on the Main Unit.
When an optional filter is not installed on the“FIL-1” slot, this key function is disabled, and its label is “N/A.”
[
C
]
Key
Press the
[
C
]
key to select the optional IF filter which is located on the “FIL-2” (Optional Filter 2) slot on the Main Unit.
When an optional filter is not installed on the“FIL-2” slot, this key function is disabled, and its label is “N/A.”

[
A
][
B
][
C
]
Multi Function Row “p”
(
MFp
)
[
DNR, DNF, DBF
]
[
A
]
Key: DNR
Press the
[
A
](
DNR
)
key to activate the DSP Noise Reduction system.
Press and hold in the
[
A
](
DNR
)
key for one second recall Menu Mode No-049 [DSP NR LEVEL] (for setting the degree
of DSP Noise Reduction).
[
B
]
Key: DNF
Press the
[
B
](
DNF
)
key to activate the DSP’s Auto Notch Filter.
[
C
]
Key: DBF
Press the
[
C
](
DBF
)
key to activate the DSP’s receiver Bandpass Filter.
In the SSB, AM, FM, and AFSK modes, press and hold in the
[
C
](
DBF
)
key for one second to recall Menu Mode No-
047 [DSP LPF CUTOFF] (for adjusting the high-frequency cutoff of the DSP Bandpass Filter).
In the CW mode, press and hold in the
[
C
](
DBF
)
key for one second to recall Menu Item No-045 [DSP BPF WIDTH]
(for setting the CW bandwidth).

[
A
][
B
][
C
]
Multi Function Row “q”
(
MFq
)
[
MONI, QSPL, ATC
]
[
A
]
Key: MONI
Press the
[
A
](
MONI
)
key to disable the Noise Squelch.
You may program the configuration of this key by the Menu Mode No-065
[
PG A
]
.
[
B
]
Key: QSPL
Press the
[
B
](
QSPL
)
key to change the Sub VFO frequency (Main VFO frequency + 5 kHz) and automatically engage
the “Split” feature.
You may program the configuration of this key by the Menu Mode No-066
[
PG B
]
.
[
C
]
Key: ATC
Press the
[
C
](
ATC
)
key to activate a 1750-Hz burst tone for 2 seconds when pressing the PTT switch while the channel
is clear.
You may program the configuration of this key by the Menu Mode No-067
[
PG C
]
.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info