478499
63
Zoom out
Zoom in
Previous page
1/132
Next page
61FT-857D Operating Manual
TRANSMITTER OPERATION
FM TRANSMISSION
ARTS™ Operation
The ARTS™ system uses DCS signaling to inform you when you and another ARTS™
equipped station are within communications range. This can be especially valuable during
search-and-rescue operations, as a base station can quickly use ARTS™ to alert a field unit
that it is out of range; the field unit can then move to a better location to re-establish com-
munications.
ARTS™ is easy to use:
1. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “f”
[
ARTS, SRCH, PMS
]
appears on the display.
2. Press the
[
A
](
ARTS
)
key to activate ARTS™ operation.
3. Your display will change to “out range” to indicate the
beginning of ARTS™ operation. Every 30 seconds, your
radio will transmit a “polling” call to the other station.
When that station responds with its return ARTS™ poll-
ing signal, your display will change to “in range” to con-
firm reception of the response.
4. To cancel ARTS™ operation, press the
[
A
](
ARTS
)
key again (the “out range” or “in
range” indication will disappear from the LCD).
ARTS™ Alert Beep Options
The ARTS™ feature allows two kinds of alert beeps (with the additional option of turning
them off), so as to alert you to the current status of ARTS™ operation. Depending on your
location and the potential annoyance associated with frequent beeps, you may choose the
Beep mode which best suits your needs. The choices are:
RANGE: The beeps are issued only when the radio first confirms that you are within range,
but does not re-confirm with beeps thereafter.
ALL: Every time a polling transmission is received from the other station, the alert beeps
will be heard.
OFF: No alert beeps will be heard; you must look at the display to confirm current
ARTS™ status.
To set the ARTS™ Beep mode:
1. While still in Multi Function Row “f”
[
ARTS, SRCH, PMS
]
, press and hold in the
[
A
](
ARTS
)
key for one second. This is a “hot key” which will instantly recall Menu
Mode No-008
[
ARTS BEEP
]
.
2. Rotate the DIAL to select the desired ARTS™ Beep mode (see above).
3. When you have made your selection, press and hold in the
[
FUNC
]
key for one second
to save the new setting and exit to normal operation.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info