478499
62
Zoom out
Zoom in
Previous page
1/132
Next page
60 FT-857D Operating Manual
Split Tone Operation
The FT-857D can be configured in a “Split Tone” configuration via the Menu mode.
This allows you to encode a CTCSS Tone but decode a DCS code, encode and decode
different CTCSS Tones, encode (only) a DCS code, etc.
1. Press and hold in the
[
FUNC
]
key for one second to enter the Menu mode.
2. Rotate the SELECT knob to recall Menu Mode No-001
[
EXT MENU
]
, then rotate the
DIAL to change the setting to “ON” to enable the extended Menu Mode.
3. Rotate the SELECT knob to select Menu Mode No-079
[
SPLIT TONE
]
.
4. Rotate the DIAL knob to select “ON” (to enable the Split Tone feature).
5. Press and hold in the
[
FUNC
]
key for one second to save the new setting and exit to
normal operation.
When the Split Tone feature is activated, the Multi Function Row “e” selection changes to
[
ENC, DEC, TDCH
]
. So, you can set the desired encoder (by pressing
[
A
](
ENC
)
key, repeat-
edly, if necessary) and decoder (by pressing the
[
B
](
DEC
)
key) separately.
When the Split Tone feature is activated, you can see the following additional parameters.
T-T: Encodes a CTCSS Tone and Decodes a CTCSS Tone
T-D: Encodes a CTCSS Tone and Decodes a DCS Code
T: CTCSS Tone Encode only
D: DCS Encode only
D-T: Encodes a DCS Code and Decodes a CTCSS Tone
D-D:Encodes a DCS Code and Decodes a DCS Code
D-D:DCS Decode only
D-T: CTCSS Tone Decode only
Split Tone Frequency or DCS Code Setup
1. Press and hold in the
[
A
](
ENC
)
(if you use CTCSS) or
[
B
](
DEC
)
(if you use DCS) key
for one second. This instantly recalls Menu Mode No-083
[
TONE FREQ
]
or No-033
[
DCS CODE
]
.
2. Press the SELECT knob momentarily, then rotate the DIAL knob to select the “R
option. This is the tone you Receive, i.e. the “Decode” tone.
3. Press the SELECT knob momentarily, then rotate the DIAL knob to select the desired
Decode CTCSS frequency (or DCS code).
4. Press the SELECT knob momentarily, then rotate the DIAL knob to select the “T
option. This is the tone you Transmit, i.e. the “Encode” tone.
5. Press the SELECT knob momentarily, then rotate the DIAL knob to select the desired
Encode CTCSS frequency (or DCS code).
6. Press and hold in the
[
FUNC
]
key for one second to save the new setting and exit to
normal operation.
TRANSMITTER OPERATION
FM TRANSMISSION
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info