478498
40
Zoom out
Zoom in
Previous page
1/84
Next page
38 FT-817ND Operating Manual
DIGITAL MODE OPERATION
(
SSB-BASED AFSK
)
The FT-817ND provides extensive capability for digital mode operation on the HF, VHF,
and UHF bands. The use of AFSK (Audio Frequency-Shifted Keying) configurations al-
lows a wide variety of different communication modes to be utilized. The Menu provides
for specific digital mode selections, which include custom BFO offsets to optimize the
receive and transmit passbands for the mode selected.
Before beginning Digital operation, you need to define which Digital mode will be utilized.
To do this, use Menu #26 as follows (in this example, we will set up RTTY as the Digital
mode):
1. Press and hold in the key for one second to enter the Menu mode.
2. Rotate the knob to select Menu #26 (DIG MODE).
3. Rotate the knob to select “RTTY.”
4. Press and hold in the key for one second to save the new setting and exit.
Use this technique to set up any digital mode.
RTTY (Radio TeleType) Operation
The “RTTY” mode on the FT-817ND is based on LSB-side carrier injection, in accordance
with long-standing amateur practice. If you need USB-side injection for your application,
see the “User” mode discussion below.
1. Connect your TNC (Terminal Node Controller) or terminal modem to the FT-817ND’s
rear-panel DATA jack, per the illustration.
2. Press the / key, as needed, to select the DIG mode (the “DIG” icon
will appear on the display). Be certain to use the “TX Audio” line from your TNC, not
an “FSK Key” line, for the transmit-data connection.
3. Press the / key, as needed, to select the DIG mode (the “DIG” icon
will appear on the display). You should now be able to tune around the band, and any
RTTY signals heard should be capable of being decoded.
TRANSMITTER OPERATION
Note
Maximum Input Lebel: 1.0 V pp
Impedance: 10 k
Ground to Transmit
Maximum Output Level: 300 mVpp
Impedance: 10k
Pin Label
DATA IN
PTT
DATA OUT
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info