478498
38
Zoom out
Zoom in
Previous page
1/84
Next page
36 FT-817ND Operating Manual
DCS Operation
Another form of tone access control is Digital Code Squelch, or DCS. It is a newer, more
advanced tone system that is less susceptible to false triggering than CTCSS. A DCS En-
coder/Decoder is built into your transceiver, and operation is very similar to that described
above for CTCSS.
1. Set the desired DCS code via Menu #23 (DCS CODE).
2. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 4
[
RPT, REV, TON
]
appears on the display.
3. Press the
(
TON
)
key three times to activate the DCS Encoder/Decoder (the “
icon will appear on the display). The receiver will remain muted until a matching DCS
code is received on an incoming signal.
4. Press the
(
TON
)
key once to cancel DCS operation (the “ ” icon will disappear).
DSC Search Scanning
In operating situations where you don’t know the DCS code being used by another
station, you can command the radio to listen to the incoming signal and scan in
search of the code being used.
To scan for the DCS code in use:
1. Press the key momentarily, then rotate the knob, as needed, until Op-
erating Function Row 12
[
TCH, DCH
]
appears on the display.
2. Press the
(
DCH
)
key to activate DCS Encoder/Decoder; (the “ ” icon
will appear on the display) and start scanning for the incoming DCS code.
3. When the radio detects the correct code, it will halt on that code, and audio will
be allowed to pass.
4. Press and hold in the (DCH) key for one second; the DCS code detected will
be stored as the “current” code, so it may be used for memory storage purposes,
and you may now exit to normal operation.
TRANSMITTER OPERATION
FM TRANSMISSION
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info