36015
56
Zoom out
Zoom in
Previous page
1/80
Next page
54 FT-7800R OPERATING MANUAL
Sixteen DTMF Autodialer memories are available on the FT-7800R. These DTMF Autodialer
memories can store up to 16 digits of a telephone number for repeater autopatch or other
uses.
To load DTMF Autodialer memories, use following procedure:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #14 (DT WRT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the DTMF Autodialer memory
channel number (“d-1” through “d-16”) into which you
wish store a telephone number.
4. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the first digit of the telephone
number you wish to store.
5. When you have selected the correct digit, press the
[
BAND
(
SET
)]
key momentarily. Now, rotate the DIAL
knob to select the second of the 16 available numbers in
this current DTMF Audodialer memory register.
6. Repeat this procedure for each digit in the telephone number. Press the
[
SCAN
(
SEL
)]
key momentarily to delete any previously-stored data
after the cursor. If you make a mistake, press the
microphone’s
[
DWN
]
key to move back to the first digit,
then re-enter the correct number.
7. When entry of all digits is complete, press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to save the new
setting.
8. If you wish to store another DTMF string, rotate the
DIAL knob to select another DTMF memory register,
then repeat steps 4 through 7 above.
9. When all required DTMF memories are filled to your satisfaction, press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
DTMF AUTODIALER OPERATION
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info